Hi,I'm using a stacked configuration with C1300-24XS switches and have configured LACP between the C1300-24XS and a C1300-24P-4X stacking switch.When I issue the following command on interface te2/0/12:C1300-24XS(2)(config)#interface te2/0/12C1300-24...
Hello everyone,I have three Cisco SG500X-24P stackable switches running on a very old firmware version 1.2.0.97. I need to bring them up to the latest 1.4.11.5 version.As we all know, an intermediate step (stepping stone) along with bootloader update...
Hey,I simply cannot change a password on the CBS250-8T-D in my lab. No matter what password I try (I tried a bunch ranging between 10 and 14 characters), I'm always gettingPassword rejected - Passwords must not match words in the dictionary, and mus...
Hello everyone,I recently acquired a Cisco SG300-10MP from a second hand electronic store and was trying to setup it up for my home lab. I am relatively new to all this and ran into a problem trying to connect the console via PuTTy. For the session ...
Hello, I am fairly new to working on switches and I am I am looking for firmware for a SG300‑10PP sx300_fw‑1.4.11.5.ros and sx300_lang‑1.4.11.5.lngI have a SG300-10PP I am setting up on my homelab, some of the command I learned at work does not work ...
Hi Cisco Community,I’m looking for help with a wireless issue in a small business environment.We have been using Cisco Business Wireless 140AC Access Points for approximately 6 months. Recently, users have been experiencing intermittent Wi-Fi disconn...
SG300 support Dynamic Trucking Protocol ?
Hello,I upgraded the firmware of my Cisco Catalyst 1300-24FP-4G switch from 4.0.0.91 to 4.1.9.85. Previously, on the old version, the port-channel was working fine with Cisco Catalyst 1300-24XS (version 4.1.3.36).Interfaces detail which were bundled ...
Hello dears, Can you explain me what is the meaning of the internal digital certificate of an analogic telephone adapter? Is this certificate shipped with the device when I put the order? What I have to do for getting it? Thank you for all! Ally...
Dear Cisco Support Team,We are facing an issue with a Cisco POE switch that is not powering on.Troubleshooting steps already performed:Replaced the power cord with a known working power cord.Connected the switch to a different power outlet/power sour...
Hello,I have an older Cisco Sf200-24P switch which I need to use for a limited period of time. In order to do so I need to upgrade it to the latest boot and firmware. In this moment it has boot 1.0.0.1 and firmware 1.3.7.18. I need to upgrade it to 1...
This is to inform you that our Cisco network switch has stopped working and is currently not functioning properly. Due to this issue, the network connectivity is being affected.We request you to kindly look into the issue and arrange for replaceme...
Folks...I got a Cisco C881W-E-K9 router earlier this year. I'm working with it on a inside test network using a WAN feed from our Cisco RV325 router. It is currently working fine with DHCP and two test clients on the test network.Now I want to upgrad...
Hello Cisco Community,I’m planning a migration of Cisco Secure Firewall Management Center (FMC) from Oracle Cloud Infrastructure (OCI-on-premises) to an on-premises KVM environment and would appreciate suggestions and recommendations from the communi...
Dear team,I have some Cisco switches and I need to check warranty so I can purchase new kindly provide me link there I can check by serial number.Thanks,arif khan
| User | Helpful Count |
|---|---|
| 2 | |
| 2 | |
| 1 | |
| 1 | |
| 1 |
