I have a 5508 WLC running on 7.0.116, I need to be able to pull all configured users off the WLC and import into excel, I have 900 odd users configured. When I run a show net user summary it only displays a third of users.
I'm hitting space to tab through each page, then eventually I just get dumped back to the command prompt. Any ideas?
Try to issue a config paging disable prior to running your command.
Sent from Cisco Technical Support iPhone App
Sure you're hitting a bug there.
WLC>show run-config commands or pull the config from wlc and export the net users to excel.
you're hitting an internal bug that is getting fixed in future release, you need to open TAC case if you need more info about this bug.