Wireless

Hi ,I've a number 1242AG APs that i want to reconfigure. These APs were in use before but i've reset to factory defaults on NCS.When i console into the APs now, using independant power source, and try to paste in my config i get"ERROR!!! Command is d...

Hello,I have Cisco Wireless Controller 2500 series (AIR-CT2504) and 10 LAPs implemented in my office building. I need to enforce security policy.I have few questions below regarding the Wireless controller 2500 Series- Please advice.1)  Can i enforce...

    thanks

Hi All,playing with the vWLC, does anyone know how to set the Default Terminal?I have this habit of switching screens when things reboot, and once the "press any key to make this the default terminal" option times out, i have to reboot the vWLC again...

Is there a way to generate historic reports on how many clients have been using a WLAN on Cisco 2504?Thanks.

Is there a way to get notified when a specific rogue SSID is detected on the network using the 5508 controller? If not, could this be done if we were running WCS?

I have bought multiple WAP121 units and would like to know the best practices for layering these units to create a unified wireless network. Can anyone assist me in doing so? Thanks,Stew Ives

Hi All,I've got a deployment of 1142N APs using a pair of 5508 controllers running 7.3.101.0.  We're in the United States and the country is set to "US".  I've added the UNII-2 channels to Auto-RF on the controllers via "config advanced 802.11a chann...

I have a custom webauth page installed that I am using with web passthrough authentication on my WLC2006 in order to put up a acceptable use policy page. The WLC uses HTTPS to display this which causes a security certificate warning to appear if I ...

I have a 1231 high in a warehouse that needs converted to Autonomous mode.Please tell me if this will work:From the controller, revert the ap to a previous release not in LWAPPWait for AP to pull DHCP to GUI into, configure from there.Is that the bes...

I have a 5508 WLC and some 3502i CAP.I have configured a guest SSID with no encryption and Web Authentication.If an attacker client use a spoofed mac address of a client correctly authenticated he can access without any authentication.Is there anythi...