02-16-2012 08:07 AM
To all:
I have a Linksys WAP200 Wireless-G Access Point problem. It is SW version 2.0.4.0. I have it configured for a small network and the problem seems to be that it is not forwarding DHCP requests onto my DHCP server. I know that it is not a SSID or Key issue as when I give my devices static IP addresses, they communicate fine within my system. The only issue seems to be when the devices make DHCP client requests. I also know that the problem is not my DHCP server as it has the device's IP / mac addresses in its configuration file and other wired devices are able to communicate with it to get their IP address through DHCP.
I have seen that there was talk in some blogs about WAP200 no forwarding DHCP requests and I was hoping that updating the device to the latest release would have resolved the problems . It didn't.
Any feedback would be greatly appreciated.
John
02-16-2012 08:08 AM
As a further note, I am using WPA2 Personnel (AES) as my Wfii encryption
02-16-2012 11:25 AM
Hi John,
Thank you for posting. What are you using for a DHCP server? What is between the WAP200 and the server?
02-16-2012 12:11 PM
I have a Red Hat Linux box that is running /usr/sbin/dhcpd which acts as
my DHCP server platform.
There are 2 PCs connected to a hub (a 4 slot Netgear switch) + the
access point + a connection to a larger network. This is the only
thing between the access point and the DHCP server.
My Wifi Devices would connect through the access point to the local network.
John
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide