I have Local authentication turned on for the 1100 and am using the Atheros Client Utility configuring LEAP with username/password and it is failing, here is the debug from the 1100.Any help much appreciated.
Xcon-ap1100#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Xcon-ap1100(config)#radius
Xcon-ap1100(config)#radius-server local
Xcon-ap1100(config-radsrv)#no nas 10.201.1.5
Xcon-ap1100(config-radsrv)#nas 10.201.1.5 key thiskey
Xcon-ap1100(config-radsrv)#end
Xcon-ap1100#debug radius
Radius protocol debugging is on
Radius protocol brief debugging is off
Radius protocol verbose debugging is off
Radius packet hex dump debugging is off
Radius packet protocol debugging is on
Radius packet retransmission debugging is off
Radius server fail-over debugging is off
Xcon-ap1100#term mon
Xcon-ap1100#
*Apr 3 16:26:26.961: RADIUS: AAA Unsupported [248] 10
*Apr 3 16:26:26.961: RADIUS: 43 61 72 64 69 66 66 4E [CardiffN]
*Apr 3 16:26:26.962: RADIUS: AAA Unsupported [150] 3
*Apr 3 16:26:26.962: RADIUS: 32 [2]
*Apr 3 16:26:26.962: RADIUS(000000FC): Storing nasport 246 in rad_db
*Apr 3 16:26:26.962: RADIUS(000000FC): Config NAS IP: 10.201.1.5
*Apr 3 16:26:26.963: RADIUS/ENCODE(000000FC): acct_session_id: 251
*Apr 3 16:26:26.963: RADIUS(000000FC): Config NAS IP: 10.201.1.5
*Apr 3 16:26:26.963: RADIUS(000000FC): sending
*Apr 3 16:26:26.963: RADIUS(000000FC): Send Access-Request to 10.201.1.5:1645 id 21645/158, len 130
*Apr 3 16:26:26.963: RADIUS: authenticator 74 20 7D 86 32 7B 1A 65 - 88 DE A7 58 51 91 FA 5D
*Apr 3 16:26:26.963: RADIUS: User-Name [1] 6 "test"
*Apr 3 16:26:26.964: RADIUS: Framed-MTU [12] 6 1400
*Apr 3 16:26:26.964: RADIUS: Called-Station-Id [30] 16 "000f.f751.7970"
*Apr 3 16:26:26.964: RADIUS: Calling-Station-Id [31] 16 "0090.963d.7bf6"
*Apr 3 16:26:26.964: RADIUS: Service-Type [6] 6 Login [1]
*Apr 3 16:26:26.965: RADIUS: Message-Authenticato[80] 18 *
*Apr 3 16:26:26.965: RADIUS: EAP-Message [79] 11
*Apr 3 16:26:26.965: RADIUS: 02 02 00 09 01 74 65 73 74 [?????test]
*Apr 3 16:26:26.965: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]
*Apr 3 16:26:26.965: RADIUS: NAS-Port [5] 6 246
*Apr 3 16:26:26.965: RADIUS: NAS-IP-Address [4] 6 10.201.1.5
*Apr 3 16:26:26.965: RADIUS: Nas-Identifier [32] 13 "Xcon-ap1100"
*Apr 3 16:26:31.966: RADIUS: Retransmit to (10.201.1.5:1645,1646) for id 21645/158
*Apr 3 16:26:36.966: RADIUS: Retransmit to (10.201.1.5:1645,1646) for id 21645/158
*Apr 3 16:26:41.966: RADIUS: Retransmit to (10.201.1.5:1645,1646) for id 21645/158
*Apr 3 16:26:46.965: RADIUS: No response from (10.201.1.5:1645,1646) for id 21645/158
*Apr 3 16:26:46.965: RADIUS/DECODE: parse response no app start; FAIL
*Apr 3 16:26:46.965: RADIUS/DECODE: parse response; FAIL
*Apr 3 16:26:46.966: %DOT11-7-AUTH_FAILED: Station 0090.963d.7bf6 Authentication failed
*Apr 3 16:26:50.070: RADIUS: AAA Unsupported [248] 10
*Apr 3 16:26:50.070: RADIUS: 43 61 72 64 69 66 66 4E [CardiffN]
*Apr 3 16:26:50.071: RADIUS: AAA Unsupported [150] 3
*Apr 3 16:26:50.071: RADIUS: 32 [2]
*Apr 3 16:26:50.071: RADIUS(000000FD): Storing nasport 247 in rad_db
*Apr 3 16:26:50.072: RADIUS(000000FD): Config NAS IP: 10.201.1.5
*Apr 3 16:29:29.041: %DOT11-7-AUTH_FAILED: Station 0090.963d.7bf6 Authentication failed
*Apr 3 16:29:52.253: %DOT11-7-AUTH_FAILED: Station 0090.963d.7bf6 Authentication failed
