01-24-2018 07:19 AM - edited 07-05-2021 08:09 AM
Hello,
I am working Cisco controller 5508 with SW version 8.3.124.61
My wlan consist out of 3 APs.
I am trying to test 11v BTM feature, using CLI test commands:
test 11v btmreq candidate/option/send ...
When trying to add and send BTM with candidate list, I receive log massages which indicates I do not have neighbours, even though I do.
Also, I have used the "test 11v btmreq candidate" commands to add all three APs to the candidate list.
I am not sure what information is required to debug this issue, so please help me out.
Thanks,
Gil
01-24-2018 07:24 AM
Hi,
You can try this debug:
debug 11v ?
all - Configures debug of all 802.11v events
detail - Configures debug of 802.11v detail
errors - Configures debug of 802.11v errors
events - Configures debug of 802.11v events
optimization - Configures debug of 802.11v Optimizations
simulation Configures debug of 802.11v for simulation data
-If I helped you somehow, please, rate it as useful.-
01-25-2018 01:41 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide