09-13-2012 01:03 PM - edited 07-03-2021 10:40 PM
I want to replace existing 1242s with 1262s. Which are currently in a Heated Nema Enclosures with 12dBi Mast Mount AIR-ANT24120. The 5.0 Ghz Radio is off. So the question is can I use the same Antennas AIR-ANT24120 for the new 1262? I’m assuming yes as long I use connectors A & C are tx/rx; on the center would we leave open or put a rubber duck on it?
09-13-2012 01:17 PM
As long as you specify that you are using A & C you will be fine. No need to put a duck on the center antenna port.
Sent from Cisco Technical Support iPhone App
09-13-2012 01:26 PM
Thank you.
09-13-2012 01:29 PM
No problem
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide