1522 Fail to load bootable image

[panayiotiscy]

Hello Netpros,

I really need your help here.

I get this message through console:

Loading "flash:/c1520-k9w8-mx.124-21a.JHA/c1520-k9w8-mx.124-21a.JHA"...flash:/c1520-k9w8-mx.124-21a.JHA/c1520-k9w8-mx.124-21a.JHA: no such file or directory

Error loading "flash:/c1520-k9w8-mx.124-21a.JHA/c1520-k9w8-mx.124-21a.JHA"

Interrupt within 5 seconds to abort boot process.
Boot process failed...

The system is unable to boot automatically.  The BOOT
environment variable needs to be set to a bootable
image.

So,my questiong follows: What is possible to be done in order to recover the boot image and most important, how?!!!

Thank you for looking into my issue.

[Leo Laohoo]

Try this ...

Converting a Lightweight Access Point Back to Autonomous Mode
http://www.cisco.com/en/US/customer/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

Please don't forget to rate our posts.  Thanks.

[panayiotiscy]

Hi,

I have been through this document but 1520 is not supported.

Any thoughts?

Please advise!!

[panayiotiscy]

Anyone?????

[panayiotiscy]

Problem fixed:

https://supportforums.cisco.com/message/3243494#3243494