Wireless

Hello, we are trying to implement something over our wireless network and to do it our security group is requiring a fairly long access list.  The problem is when I try to apply it to my access point it fails saying there isnt enough memory.  Is ther...

Hi,I have a wireless setup that is using WLSM in a 6500 switch which is also acting as WDS.The problem that am encountering is that wireless laptops that are not in the domain are workingperfectly without any issues,they can roam without dropping the...

Hi,We are developing a network where the APs will be connected to DSL connections(publics).  Now we are seeing the subject of security in the WLC, and my question is if the amount of tunnels can be limited that can receive the WLC in simultaneous for...

Hi AllI have some wireless issues. Let me explain you,We have WLAN infrastructure with Cisco Aironet WAP distributed on the floors. Recently I've recived complaint from one of the floor, that they are facing slowness while working on SQL Application....

Hi, we currently own several Aironet 1252 WAP with the N draft. Is there a firmware update to the official 802.11N? If so, where can I locate the firmware?Our WAP is the "AIR-AP1252G-A-K9" model.

Have recently upgraded 6500 Wism from ver 6.0.196.0 to 7.0.98.0.Upgrade process was successful but noticed that secondary image still is in the previous version (6.0.196.0).I have read that to upgrade it we must use ER Boot release image,but the late...

Does anyone know of a way to clear the load balancing statistics from a WLC 4404?  I've looked through the gui and CLI and can't seem to find a way to do it.Thanks,Rob

Is there a command that will let me know if the antennas of a 1242 are connected to the 2.4GHz side or the 5GHz side?

Hi all.We curently have a corporate WiSM estate that anchors a guest wireless network to a 4402 controller sat within a DMZ.  This then uses a custom web bundle for local user authentication, the users which are added by any receptionists at either o...

We are currently trying to setup our 4400 to authenticate on an Open LDAP Linux server.

Hi,I am not very familar with security devices .But our project need to test the file sharing performance between the Redhat ENT Linux servers segregated by ASA 5510 FW as per attach. We would use rsh, ssh , ftp ,rcp protocols in order to transfer th...

I've been asked by a customer to provide an LWAPP wireless LAN at a site in Guatemala but the Cisco Wireless Compliance document shows no entry for that country.  Has anyone installed Cisco wireless in that country and if so what equipment and settin...

Good dayWe are currently deploying the Cisco unfied guest access solution (as per best practices). The one area that is alittle grey is the actual placement of the guest server. Could you please comment on wether the server should be place in the DMZ...

Hi,i have a problem with Wip 310 and wireless Network CIsco. I have installed WIP310 on the CUCM 7.1.32900 but the  handover don't fuction. When I have and active call and i move from AP  to other AP the call is dropped. With 7925 don't have any prob...

HiI know that if i upgrade to firmware version 1.3.3 i can't downgrade to a lower version.But I'd like to know if possible to downgrade from 1.3.4SR1 to firmware 1.3.3 because  i'd like to test version 1.3.4SR1.ThanksBest RegardsMC