03-16-2015 09:16 AM - edited 07-05-2021 02:43 AM
dear all,
kindly guide me how to configure WLC 5508 internal DHCP per WLAN basis , i read the following document it is clearly mentioned that we can configure DHCP on WLC 5508 per WLAN basis. but i did not find the configuration per WLAN basis
need your kindly response
my email address
engr_sajid_khan@yahoo.com
03-16-2015 12:17 PM
When you configure dynamic interfaces on your 5508, you can specify DHCP server IP address. Later on you will map a dynamic interface to WLAN.
Also under WLAN advanced setting, you can specify DHCP server IP, if you want to override dynamic interface configured DHCP server to a particular WLAN.
HTH
Rasika
**** Pls rate all useful responses ***
03-17-2015 02:42 AM
in our scenario we have 4 VLANS and each VLAN bind with separate WLAN and we want a following IP scheme
VLAN 46 dhcp scope must be 10.3.46.0
VLAN 47 dhcp scope must be 10.3.47.0
VLAN 48 dhcp scope must be 10.3.48.0
VLAN 49 dhcp scope must be 10.3.49.0
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: