5508 guest lifetime

[sprocket10]

We have receptionists using the Guest management portal to setup accounts for visitors. They keep setting up users with long lifetimes. Is it possible to set this so they can only set a maximum of 1 day?

[Sandeep Choudhary]

Which guest management portal r u using ?

by ISE sponsor portal you can set that easily to one day to 1 year.

Regards

Dont forget to rate helpful posts

[sprocket10]

Hi

The receptionists log onto the 5508 as a user setup for lobbyadmin

[Sandeep Choudhary]

Hi ,

There is a option to set lifetime of 1 day or more.

check the attached screenshot:

Regards

Don't forget to rate helpful posts

[sprocket10]

sorry, please read my first post.

"They keep setting up users with long lifetimes. Is it possible to set this so they can only set a maximum of 1 day?"

If the receptionist enters 31 days, they get the below error, but I want this to happen if they try 2 days

___________________________ERRORS ____________________________

days : 31 : is an invalid value. Valid range is  0 <>  30

Make the necessary corrections and try again

[Sandeep Choudhary]

Hi,

this is not possible on WLC to set max to 2 days.

you have to use ISE sponsor portal to achieve this.

Regards

[abwahid]

Hi,

In ISE you have option to configure different time profile (as you want ) and call that profile while creating / setting up an account for visitors.

Go through the below link for configuration help.

http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/upgrade_guide/b_ise_upgrade_guide_13/b_ise_upgrade_guide_13_chapter_0101.html

[gohussai]

Using WLC 5508 GUI.

Disable under the WLAN advance tab the session
time out option since this is used only when working with layer 2 authentication
like WPA PSK or WEP, and then under the controller tab set the client idle time
out the 0 for infinite or the requested time.

Hope this will be helpful ,do mark the answer correct if its helpful.