cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
508
Views
0
Helpful
1
Replies

5520 wireless controller

JMCNEL
Level 4
Level 4

Are the 2 x 10 gigabit Ethernet ports backward compatible to 1 gigabit Ethernet for the interim until we can replace our 6509e with a 9407R?

1 Reply 1

Hi

 

"

Switching Between 10 G and 1 G

  • If there is nothing installed in port 1, the board will be configured for 10 G mode by default. Therefore, to switch to 1 G mode, an SFP module must be installed in port 1 and the system needs to be rebooted.

  • Conversely, if an SFP module is installed and the user wants to switch to 4 x 10 G mode, then an SFP+ module must be installed in port 1 and the WLC rebooted.

  • Thus, Online Insertion and Removal (OIR) of SFP and SFP+ between 10 G and 1 G is not possible.

  • OIR of 10 G to 10 G and 1 G and 1 G is possible."

https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-1/5520-WLC-DG/b_Cisco-5520-WLC-deployment-guide.html

 

-If I helped you somehow, please, rate it as useful.-

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: