02-28-2007 11:00 AM - edited 07-03-2021 01:42 PM
we have two 7920's and seen that we could not get them to authenticate to AP though both ssid and the encryptions on both the 7920 & AP were correct.
both phones could not authenticate and all settings were correct.
it wasn't until we reset the phones to factory defaults and re-keyed all settings then we could auth to AP.
any suggests as to why such occured ??
strange....
02-28-2007 11:32 AM
Sounds like a config issue.
Was it ever working? Did you upgrade/downgrade phone firmware?
Which authentication/encryption is used?
02-28-2007 12:29 PM
we thought the same, but it was working fine. for the time that we used them and there was no upgrade, using latest firmware.
The thing I failed to say was that we had left the phone's go dead, and needed to re-charge them before usage. <-after recharge was when we saw them unable to authenticate or authenticate failed. we could only use them after resetting them to factory defaults and re-keying the configs.
authentication wep 128 bit,w/ with un-broadcasted ssid
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide