7921 inactive profile

[garry-baker]

Hi Guys,

In the 7921 via the USB interface if i add an ssid to a profile it goes inactive, i am unable to activate a profile if it has an ssid. if i take the ssid out of a profile i get an error saying i need an ssid for the profile to become active, but the profile is supposedly active without the ssid on the top network profiles page. do i possibly have a dodgy firmware version? it is currently on 1.0.6

Garry

[garry-baker]

Guys,

Just in addition to above.I reset the phone to factory settings and the default cisco profile is inactive.

Garry

[migilles]

Will only show active once it's associated.

Also 1.0.6 is only a mfg version. Should upgrade to 1.1(1).

http://www.cisco.com/cgi-bin/tablebuild.pl/ip-7900ser-crypto