Solved: 802.11b Japan AP Channel 14

Jay233 · ‎10-09-2012

Hi All,

Does any one know if Cisco's WLC's or NCS can detect a rouge access point operating on channel 14 when configured for country code GB?

Thanks in advance for your replies.

Sent from Cisco Technical Support iPhone App

Saravanan Lakshmanan · ‎10-13-2012

#Wireless>> 802.11 b/g/n>> Noise/Interference/Rogue/CleanAir1 Monitoring Channels >> channel list>> By default 'All Channels' are selected.

#With above config, AP on cc-GB won't broadcast any info however it can listen for rogues on all valid channels without violating fcc. However, AP on cc-GB can't contain or RLDP on Rogue using ch-14.

#If it didn't detect rogues then let know.

View solution in original post

George Stefanick · ‎10-09-2012

That's a great question and I don't know for sure. I want to say no. I want to say the ap will only scan channels its country code is configured for.

Maybe one of the Cisco guys can confirm.

Sent from Cisco Technical Support iPhone App

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

Saravanan Lakshmanan · ‎10-13-2012

#Wireless>> 802.11 b/g/n>> Noise/Interference/Rogue/CleanAir1 Monitoring Channels >> channel list>> By default 'All Channels' are selected.

#With above config, AP on cc-GB won't broadcast any info however it can listen for rogues on all valid channels without violating fcc. However, AP on cc-GB can't contain or RLDP on Rogue using ch-14.

#If it didn't detect rogues then let know.