Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
Hello I have a Cisco AIR-BR1310G-A-K9-R which is cuurently running Cisco IOS C1310-K9W7-M Version 12.3 (8) JEA. I have trying to figure out idf there is anewer version of the IOS for this model and if so what improvements does it have over my...
Has any used the 3602e as a bridgeing only between two networks? Controller 2504 version 7.4.100 I can't ping anything on either side of the network, but I can ping from the controller to each AP.I have two 1552 setup the same way ...
Hi,I have a number of Lobby Administrators on my 5508 Guest controllers. I would like to access the logs that tell me which lobby administrator created which guest account. How is it I do that from the 5508? I've looked and can't see to find it. I di...
I have two 8510 wireless controllers running in SSO mode and I would like to upgrade from 7.4 code to 7.5 to take advantage of the AC modules that I have in our 3600 access points. What is the prescribed method of doing so on the 8510's?
WLC was going to https://1.1.1.1/login.html?redirect=google.com/ and worked beautifully for years.All of a sudden the web browser is now going to: https://(my domain controller name/login.html?redirect=google.com/I have to manually put in the 1.1.1....
I have 5508 wireless lan controller and 3502 AP. I did all configuration on WLC using the configuration guide. But AP don't join the WLC. AP can assign an IP address and i can ping this IP from WLC. When i connect the AP from conso...
Hi Folks,I have a pair of WLC 5508s deployed on my LAN in an active-standby pair, and a WLC 2504 deployed in my DMZ as a guest Anchor.I have configured a WLAN (guest) for webauth. The guest WLAN is anchored to the 2504 in the DMZ, and webauth is w...
Hi guys,Today I tried to configure wireless link between two autonomous AP 1602 APs.There is a problem with Non-root bridge. I configured it with this command:AP2(config-if)#station-role non-root wireless-clientsNon-root bridge successfully joins the...
Hi everyone,I am having some trouble trying to figure out how to configure my 1242 to run SSIDs for Vlans.I have the AP plugged into a Switchport that is configured for trunking.Here is how it is setup.VLAN 1 untagged nativeVLAN 10 Tagged <--- Wirele...
Hey,I wonder what happens to the wireless client and LAP running in local mode if connection to wireless lan controller is down OR the controller itself is down? I do not think LAP will reboot by itself but will wireless client lost wifi connection a...
here is the new issue and question.tftp, ftp, scp server ping to 1552e ap and 1552e ping to server. when i try telnet to 21 over 1552e i m getting timeout. i m connecting to any other pc, laptop etc. to 21 port. please help me what s happening going ...
Hi,I have around 2000 APs in my network and have 2*WiSM2 modules with 1000 AP licenses each and my core switch is 65K-Sup2T in VSS.How an I acheive HA for my WLCs for total 2000 APs.Will 1*WiSM2 module & one HA module per chassis will work for this o...
Hi all,I need to do some HA setup between two Cisco 8510 controllers.I only have the opportunity to connect the two redundant ports with 100 mbps switch link. Wil it work, or MUST it be gigabit connection?The two 8510 will replace 2 x 5508, which tod...
I got a question.I have a 2504 controller, and a bunch of 3600 APs. (which now works, thanks to Scott Fella)I want the WIFI users to be able to connect to the WIFI, If their computer is part of the domain. Otherwise, they connect to the guest WIFI.Ho...
Right now we're using WPA2 - PSK; and although it works flawlessly, I hate having to touch every single device to connect it to the WLAN.I'm looking for something that will allow a user to login to a laptop; and have them select the prod wlan, and wi...
