about Wism PPPOE problem

[nathen.fan]

wlc2106 + 1131AP client over pppoe successfully is open “broadcast forwarding”

but on wism wlc-a and wlc-b don't PPPOE

then open “broadcast forwarding”(client in wire network pppoe successfully)

sniffer wireless client found only pppoe request then no response . Broadcast was filtrated on wism

I hope people have to help me.

thank you!

[carenas123]

The LWAPP infrastructure does not support PPPoE. The reason is that the PPPoE Ethertype is dropped at the controller.