01-05-2011 02:45 AM - edited 07-03-2021 07:37 PM
Hi everyone
I want to confirm the possibility of using the AIR-ANT2506 2.4Ghz bridge antenna on the AIR-LAP1242-EK9-10 Access Point in AP mode
Also the possibility of clients such as mobile laptops associating with this antenna, even at it's farthest coverage range
Do let me know these.
thanks
sam
Solved! Go to Solution.
01-05-2011 03:51 AM
Hello sam,
as per this link
i see this antenna can be used with 1240...
for the client connection it still can connect from far place ( as far as the signal reaching that spot)... but the connection will be with slow speed...
Kind regards
Talal
=========
please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily
01-05-2011 03:51 AM
Hello sam,
as per this link
i see this antenna can be used with 1240...
for the client connection it still can connect from far place ( as far as the signal reaching that spot)... but the connection will be with slow speed...
Kind regards
Talal
=========
please rate answers that you find useful , and mark as answered - when it is :-) - so others can find it easily
01-05-2011 04:38 AM
Tx but I cannot access the link that you sent..
Br
sam
01-05-2011 04:44 AM
Hello Sam,
thanks for update.
please try clearing cockies at your browser...
if not working , please try to access it from following location.
http://tools.cisco.com/squish/8226A
Kind regards
Talal
01-05-2011 05:04 AM
Ok tx it's working now..
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide