cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1179
Views
0
Helpful
4
Replies

Access Points Question

curthaar1
Community Member

We have a wireless controller with 15 access points(AIR-CAP2702i-K9). They were all up & working fine until we had a power outage. After the power came back up, they all came back up but 3 of the access points will not accept any clients. I have re-configured them but still no luck.

4 Replies 4

curthaar1
Community Member

Here is the message I get in the log

 

The system could not release exclusive access of AP entry for fc:5b:39:88:1a:10 in the database

Rasika Nayanajith
VIP Alumni
VIP Alumni

What version of WLC code you are running ?

Are you able to provide console output of a impacted AP while it is power cycle. Pls attach it if possible

 

HTH

Rasika

**** Pls rate all useful responses ****

version is 7.6.130.0

 

*spamApTask4: Dec 01 13:10:56.734: #APF-3-WLAN_OUT_OF_RANGE: apf_site_override.c:2309 WLAN value 17 is out of range.
*spamApTask4: Dec 01 13:10:56.734: #LWAPP-3-VENDOR_SPEC_ERR: spam_lrad.c:13418 The system has failed decoding vendor specific payload
*spamApTask4: Dec 01 13:10:56.585: #CAPWAP-3-SEM_RELEASE_ERR: capwap_ac_db.c:107 The system could not release exclusive access of AP entry for 7c:0e:ce:f1:20:20 in the database
*spamApTask4: Dec 01 13:10:55.783: #LWAPP-3-VALIDATE_ERR: spam_lrad.c:10770 Validation of SPAM_VENDOR_SPECIFIC_PAYLOAD failed - AP  7c:0e:ce:f1:20:20
*Dot1x_NW_MsgTask_6: Dec 01 12:57:45.030: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 00:0e:8e:44:03:b6 - got 00 00 00 00 00 00 00 04, expected 00 00 00 00 00 00 00 05
*Dot1x_NW_MsgTask_4: Dec 01 12:57:42.374: #DOT1X-3-INVALID_REPLAY_CTR: 1x_eapkey.c:445 Invalid replay counter from client 00:0e:8e:62:9a:7c - got 00 00 00 00 00 00 00 02, expected 00 00 00 00 00 00 00 03
*spamApTask7: Dec 01 12:56:00.207: #APF-3-WLAN_OUT_OF_RANGE: apf_site_override.c:2309 WLAN value 17 is out of range.
*spamApTask7: Dec 01 12:56:00.207: #LWAPP-3-VENDOR_SPEC_ERR: spam_lrad.c:13418 The system has failed decoding vendor specific payload
*spamApTask7: Dec 01 12:56:00.119: #CAPWAP-3-SEM_RELEASE_ERR: capwap_ac_db.c:107 The system could not release exclusive access of AP entry for fc:5b:39:88:1a:10 in the database
*spamApTask7: Dec 01 12:55:59.202: #LWAPP-3-VALIDATE_ERR: spam_lrad.c:10770 Validation of SPAM_VENDOR_SPECIFIC_PAYLOAD failed - AP  fc:5b:39:88:1a:10
*Dot1x_NW_MsgTask_4: Dec 01 11:56:26.186: #DOT1X-3-

Thanks for version info of WLC.

We really want AP console output while it is reboot to see what's the reason for not registering to the WLC

 

HTH

Rasika

Review Cisco Networking for a $25 gift card