adding additional dhcp scopes to a 5508 controller

[Shawn Purdy]

Ok guys and gals. Here is my situation

I have two 5508 controllers configured with an internal dhcp scope. The scopes on each controller are a /22. I need to expand the scope to provide more addresses. Is there an easy way to add a second dhcp scope without making changes to the existing scope? If so how will the clients devices be able to access that ip address range?

Sent from Cisco Technical Support iPad App

[Stephen Rodriguez]

there is not. You will need to change the mask on the gateway and the scope. The WLC does not support secondary addresses.

Steve

Sent from Cisco Technical Support iPhone App