02-26-2014 03:20 PM - edited 07-05-2021 12:17 AM
I just created an AP group for the first time on my 4402 controller. When I went to add an SSID to the group, it says it will disable the WLAN. Does that mean all users on that SSID will be disconnected? How long would the loss of connectivity last typically?
Solved! Go to Solution.
02-26-2014 03:34 PM
Kevin,
The wireless for an SSID will glitch only if you make a change to that WLAN, not by adding it to an AP Group, unless you remove it.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
02-26-2014 03:31 PM
Adding an SSID to an existing AP Group will not affect the wireless.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
02-26-2014 03:34 PM
Kevin,
The wireless for an SSID will glitch only if you make a change to that WLAN, not by adding it to an AP Group, unless you remove it.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
02-26-2014 04:31 PM
Good to know, thanks! I guess the WLC is assuming I'm making changes when I try to add the SSID to the group.
02-26-2014 04:38 PM
Yeah... I add and delete ssids' all the time for testing.
Thanks,
Scott
*****Help out other by using the rating system and marking answered questions as "Answered"*****
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide