11-19-2020 10:43 PM - edited 07-05-2021 12:48 PM
Hi,
I have Airnet 1832I-S-K9 and AIR-CAP-1702I-E-K9 that come with capwap image.
I wanna use 1832 as ME controller and 1702I as AP.
I have change capwap to mobility express on Aironet 1832I-S-K9.
1702I can't joined with below error message.
Please help me and kindly check below error message/output.
but if i check "show ap join stats summary all", it show joined why ?
AP and ME version,
Thanks !
Solved! Go to Solution.
11-19-2020 11:14 PM
I think you have an issue with regulatory domain mistmatch:
1832I-S-K9 --> Its for Brunei Country and
AIR-CAP-1702I-E-K9 --> Its for Europe..
In which country your 1832 Ap/WLC installed ?
Regards
Dont forget to rate helpful posts
11-21-2020 12:58 AM
1832 WLC and 1702 AP are in different network ?
As per the logs, 1702 AP not able to find WLC.
Try to keep both APs in same network.
Regards
Dont forget to arte helpful posts
11-21-2020 03:16 AM
Make sure you have the same software on both APs.
Currently AP has: 8.2.151.0 version.
If you are ruuning very high version on WLC side then it will not able to join or will not able to download the correct image.
Regards
Dont forget to arte helpful posts
11-19-2020 11:14 PM
I think you have an issue with regulatory domain mistmatch:
1832I-S-K9 --> Its for Brunei Country and
AIR-CAP-1702I-E-K9 --> Its for Europe..
In which country your 1832 Ap/WLC installed ?
Regards
Dont forget to rate helpful posts
11-20-2020 03:10 AM
I already change 'TH' country.
1702 can join standlone wlc that is TH country but it can't join ME controller. why?
Thanks
11-20-2020 03:21 AM
can you paste the bootup process logs from AP console.
11-21-2020 12:46 AM
Please check logs.
11-21-2020 12:58 AM
1832 WLC and 1702 AP are in different network ?
As per the logs, 1702 AP not able to find WLC.
Try to keep both APs in same network.
Regards
Dont forget to arte helpful posts
11-21-2020 02:42 AM
HI,
In this case AP can join standlone WLC 2504 but it can't join ME controller 1832.
11-21-2020 03:16 AM
Make sure you have the same software on both APs.
Currently AP has: 8.2.151.0 version.
If you are ruuning very high version on WLC side then it will not able to join or will not able to download the correct image.
Regards
Dont forget to arte helpful posts
11-21-2020 04:37 AM
Thank you so much bro!
11-21-2020 05:45 AM
Glad to help.
Regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide