Air AP2802i-B-K9 upgrade to ME

[Sasoke]

I have AIR-AP2802i-B-K9 updated to ME using the first update in the picture. My question is what is the second update shown in the picture, how to use it?   Because I can't connect to the system. I use PUTTY to communicate via the Console connection. It shows me the IP but I can't access it.

I already had upgraded a 2702i unit to ME and worked fine, but that one has one package to update, this one has two. What I am missing?

[Leo Laohoo · Accepted solution]

The 2nd file is an AP Image Bundle.  The first file is only the firmware for the 2800 (and related family).  If there are slave APs that are not 2800/3800/4800/1560, then they may need the AP Image Bundle if the slave APs are of different "family" such as 2700/3700/1540/IW3700 or 9115/9120/9130.

[Sasoke]

Thanks, Leo, this is good news to me that I don't need the other SW. 

[Leo Laohoo]

Download both. 

Upload both.  

[Sasoke]

I can't, after uploading the first one, the commands changed and began to ask for users and passwords. 

[Sasoke]

I use these commands to upload and after finishing, it beganse to asks for log ids and passwords.

-   capwap ap ip 10.0.20.5 255.0.0.0 10.0.20.10

-  ap-type mobility-express tftp://10.0.20.10/AIR-AP2800-K9-ME-8-10-196-0.tar