AIR-SAP2602 models convert from autonomous to lightweight?

[tomyip]

AIR-SAP2602 APs operate as autonomous or standalone APs by default or design. Is it possible to convert them to lightweight APs?

[Scott Fella]

Yes you can convert them, you just need to be able to download the code.

Using a TFTP Server to Return to a Previous Release

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

https://supportforums.cisco.com/docs/DOC-18268

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

http://www.youtube.com/watch?v=QQ_NuxdRhQ4

https://supportforums.cisco.com/docs/DOC-14960

Sent from Cisco Technical Support iPhone App

[sgprice]

The links in your post appear to be for older access points, not 2602's specifically. There is no archive-download command on the 2602.

[Scott Fella]

The command is archive download-sw and its available in all Cisco access points.

Sent from Cisco Technical Support iPad App

[Abha Jha]

Yes it can be converted to lightweight once you upload proper K9W8 software on this AP by the conversion tool method or archive-download method.

[blenka]

http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html

kindly follow the above link for the steps getting done.

Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode