04-01-2025 11:23 PM
Dear All
i have cisco 3504 controller running 8.5.182.108 at small site i want to upgrade it to Release 8.10.196.0
i have question that 8.10.196.0 is compatible with 9800 controller to form mobility tunnel
cisco document says 8.8.X and later with IRCM but not clear with 8.10.X Aireos
Solved! Go to Solution.
04-01-2025 11:37 PM
In the above cases, just map the same VLAN/subnet to the SSID on both the Catalyst 9800 and AireOS WLC; the only suggestion would be to run the following recommended releases:
Cisco IOS XE code: Release 16.12.5 or 17.3.3 and above.
AireOS code: Release 8.5.176 IRCM or 8.10.151 and above
So , 8.10.196.0 is OK
M.
04-01-2025 11:37 PM
In the above cases, just map the same VLAN/subnet to the SSID on both the Catalyst 9800 and AireOS WLC; the only suggestion would be to run the following recommended releases:
Cisco IOS XE code: Release 16.12.5 or 17.3.3 and above.
AireOS code: Release 8.5.176 IRCM or 8.10.151 and above
So , 8.10.196.0 is OK
M.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide