AireSpace 2006 - use as wireless IDS

[lhoyle]

I have setup a AireSpace 2006 with 3 AP's for wireless Internet Access at my site. Our SEcurity Folks want to be able to look at the GUI as a IDS. I have found that the 2006 has IDS signatures but I cannot find what I need to configure to make the device a "quasi-IDS".

Thanks in advance.

Lee

[smalkeric]

the most critical signatures are enabled when you install IDS Device Manager. When an attack is detected that matches an enabled signature, the sensor generates an alert event (formerly known as an alarm), which is stored in the sensor's event store. For further informa tion look at the following url:

http://www.cisco.com/en/US/products/sw/secursw/ps2113/products_installation_and_configuration_guide_chapter09186a008014a218.html#wp592765