03-02-2006 11:05 AM - edited 07-04-2021 11:43 AM
Can anyone tell me about:
1. Where can i download AP-1200 help for use it in my LAN and want write sonething like:
ip http help-path http://192.168.0.254/path/to/help
2. I have many L2 switches (not catalyst!) with VLANs where 1 VLAN is my own managment VLAN (users can't see swith IP adress etc.) and i want do something like that with dosens of my AP-1200... in my dreams AP-1200 have 2 VLAN's - one for managment and another one - for wireless users... examples or links exept http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml are welcome
3. How can i switch AP-1200 to "802.11G Only" mode and have WLAN coverage as big as possible
Thank you and sorry me for my poor english (it must be better)
03-08-2006 12:33 PM
When you enter the WEP key the AP converts into Hex and that is the reason you see a different WEP key. This should not be problem. As long as you enter the same WEP key on the Client and the AP the client will connect to the AP.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008055c39a.shtml
03-08-2006 11:43 PM
Sorry but i don't say about WEP...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide