06-27-2011 03:12 AM - edited 07-03-2021 08:21 PM
Hi community,
is it possible to use a AIR-CAP3502I-E-K9 without a WLC? I read some discussions
about an autonomous IOS. Is it avaiable yet?
If not can you give a suggestions for a suitable WLC. I only have to
connect two AIR-CAP3502I-E-K9 in an small business environment.
Thank you very much
Nico
06-27-2011 05:41 AM
Hi Nico,
The 3500 series is not supported in Autonomous mode. Here is an excellent
discussion that discusses why you won't want to go that route
https://supportforums.cisco.com/message/3328767#3328767
The smallest WLC for support of the 3500's would be something like a 2106.
Maybe you would like to look into the 1260 or 1040 AP's in your environment;
http://cisco.biz/en/US/docs/wireless/access_point/ios/release/notes/12_4_25d._JArn.pdf
Cheers!
Rob
06-27-2011 03:28 PM
As Rob mentioned. You "can" load an autonomous IOS into the 3500 but TAC won't help you if you need configuration assistance. Autonomous IOS was "built" for wireless site survey and nothing else.
Also as Rob mentioned, the smallest WLC is the 2K series, i. e. 2504 but personally I wouldn't recommend it because there's really no major improvements to the 2106. I would, on the other hand, recommend the WLC 5508 instead.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide