Airplay device not visible on a cisco 2702i access point

007_Jappie · ‎01-21-2023

I have a cisco 2702i access point autonomous and connected a KEF LSX audio system to it. With my iPhone I have a WiFi connection to the cisco, but I don't see the KEF LSX listed in airplay. Anyone have an idea how I can solve this?

marce1000 · ‎01-21-2023

- If you go to the configuration menu's of the autonomous access point and you can't find any settings related to mdns, then I presume this is not possible for AP's in autonomous mode and or running autonomous software (meaning only on controllers) ,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Rich R · ‎01-22-2023

I see plenty of previous similar posts and no confirmed solutions.
See @Rasika Nayanajith's reply at https://community.cisco.com/t5/wireless/chromecast-with-autonomous-access-points/m-p/2589649#M51626 and try that. The original poster there never confirmed if it helped so let us know if it makes any difference for you. If not then I think the conclusion is that it won't work with autonomous AP.

------------------------------
Please click Helpful if this post helped you and Select as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's and TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's, Best Practices for 9800 WLC's and Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390