Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
3553
Views
0
Helpful
7
Replies

Airplay support - Aironet AP1140 Standalone

stanchelchowski
Level 1
Level 1

‎10-13-2012 01:39 PM - edited ‎07-03-2021 10:49 PM

Hello,

We have been successfully using our Aironet 1140 AP in standalone mode with mainly Windows pcs & laptop users, and now, iPads and iPhones.

All seem to connect happily through the 1140.

Recently we have a requirent to be able to use Apple's Airplay. Basically, it is not working through the 1140, it works ok via wired ethernet. Can the 1140 support Airplay? - If yes, what precisely must be enabled/configured? - please be specific as I am very much a greenhorn on configuring this AP.

We have a single Class C network without any Vlans. I understand multicast must be enabled, I can't see where to enable this. I really would appreciate some guidance on getting this working if it is at all possible. Much appreciate your time.

Rgds.

Stan Chelchowski

http://www.stokemandevillestadium.co.uk/

Labels:
0 Helpful
7 Replies 7

stanchelchowski
Level 1
Level 1
In response to Yahya Jaber

‎10-13-2012 11:13 PM

Hello Yahya,

Will do.

Thanks for your prompt response. I'll get back to you with my report.

Rgds.

Stan Chelchowski

0 Helpful

f.duivenvoorden
Level 1
Level 1
In response to stanchelchowski

‎11-24-2013 03:18 AM - edited ‎12-09-2019 12:32 PM

I had the same problem, i upgrade to the 15.2 (4) and solved this issue to.

0 Helpful

stanchelchowski
Level 1
Level 1
In response to Yahya Jaber

‎10-18-2012 06:32 AM

Hello Yahya,

I read through all those links and no matter what I tried it didn't fix it.

However, I suddenly realised I have never upgraded the s/w on these devices. I downloaded the latest 12.4 version and it now works perfectly.

A lesson to all ( and me especially) - make sure your software is up to date......

Thanks for your help

Rgds.

Stan Chelchowski

0 Helpful

Dorian Kind
Level 1
Level 1

‎10-11-2013 08:45 AM

Hi all,

sorry for reactivating this old thread, but I have the exact same problem with two autonomous AP1142N. The hosts involved are all on the same VLAN and subnet, so there should be no routing involved — in fact, whether IGMP snooping is activated or not doesn't make a difference.


The interesting part is that multicast pings from the wireless segment to the wired segment works, but the other way around is blocked at the AP.

If, on a host on the WiFi, I do a simple 

ping 224.0.0.251
 
I get answers from multiple hosts in the wired segment (but only from there). The same ping from a wired host also only receives acknowledgments from the wired hosts.
So it appears as if the hosts on the WiFi are not able to join the multicast group. I've also noticed that many IGMP-related commands on the APs such as
show ip igmp groups
 
just return "router IGMP command not supported".
Finally there's a post on this forum that seems to imply that Bonjour support was broken in IOS v15 (which I have on the APs):
Scott Fella wrote:
The configurations look fine from what I also have read on the forums.  I just know the v15 has broke the bonjour stuff.




Thanks, 

Scott 

So all in all, I'm pretty confused. Is there any way I can get Bonjour to work with our APs?
Thanks for any and all feedback, even if it's just to let me know that it won't work.
Cheers,
Dorian 

					
				
			
			
				
			
			
				
			
			
			
			
			
			
		

		
		
	

	
	


	
				
		
			
					
		
	
				
		
			
					
		
	
				
		
			
					
		
	
				
		
			
					
		
			
		
	
				
		
			
					
		
	
				
		
			
					
				
		
			
		
			
					
			
		
				
		
	
	


		

	

		

			

	
		
			
					

	
			

				
		
			
		
			
				

					
						
	
			0
		

	Helpful

					
				

			
			
		

	
		
    	
		

			
				
					
				
				
			
		

	
    
			

		

	

	

	

    

	

	


				
		
	
	


		

			

	
		
			
					
				
		
			
		
			
		
	
	


		

	

		

			

	
		
			
					
				
		
			
					
				
		
			
					
		
	
				
		
			
					
		
	
				
		
	
	


		

	



		

	

	

	




			
		
    
            

                

            

        

	
		

		
	

	

	



	
                

                
				
            
                
                    
        

	
	

		
	

	


		
	
		

			

	 
	 
	
	

	

	

	
		

			

			
	

	

		


	

	
		

			
			

	

		

			

	
		
			

		


	

	
			

	
	
	 
	
	
	
				
		

			
				
					
					
				
			
		

	
			
	
	
	
	
	


		

	

	

	

	

	

	

	
			
					
				
		

	


	

		
	
	


		

	

		

			

	
		

			
		
			
			
		
		
	
		

	
	


		

	

		

			

	
		

			
		
			

	
			
					craig.beck
					
				
		


		
	
		

	
	

	
		

			
		
				
		
	

	

	
			
				
		
		
			
		
		
		Level 1
		
		
		
		
		
	
			
		

		
			
					
		

			Level 1
		

	
				
		
			
					

	
		
	
	


				
		
	
		

	
	


		

			

	
		
			
		
			
					
		

			
    

	
		
		
		‎10-11-2013
	
		
		03:36 PM
	
	

	
	
	
	
	
	
	
	
	
	
	
	

		

	
				
		
	
	


		

	

		

			

	
		
			
					
		

	
		

			
				
					
					
						
Sounds counter-intuitive, but try disabling IGMP snooping on the AP.

-Edit: just noticed you already tried that! Does any multicast traffic actually work at all over the AP?

Sent from Cisco Technical Support iPhone App

					
				
			
			
				
			
			
				
			
			
			
			
			
			
		

		
		
	

	
	


	
				
		
			
					
		
	
				
		
			
					
		
	
				
		
			
					
		
	
				
		
			
					
		
			
		
	
				
		
			
					
		
	
				
		
			
					
				
		
			
		
			
					
			
		
				
		
	
	


		

	

		

			

	
		
			
					

	
			

				
		
			
		
			
				

					
						
	
			0
		

	Helpful

					
				

			
			
		

	
		
    	
		

			
				
					
				
				
			
		

	
    
			

		

	

	

	

    

	

	


				
		
	
	


		

			

	
		
			
					
				
		
			
		
			
		
	
	


		

	

		

			

	
		
			
					
				
		
			
					
				
		
			
					
		
	
				
		
			
					
		
	
				
		
	
	


		

	



		

	

	

	




			
		
    
            

                

            

        

	
		

		
	

	

	



	
                

                
				
            
                
                    
        

	
	

		
	

	


		
	
		

			

	 
	 
	
	

	

	

	
		

			

			
	

	

		


	

	
		

			
			

	

		

			

	
		
			

		


	

	
			

	
	
	 
	
	
	
				
		

			
				
					
					
				
			
		

	
			
	
	
	
	
	


		

	

	

	

	

	

	

	
			
					
				
		

	


	

		
	
	


		

	

		

			

	
		

			
		
			
			
		
		
	
		

	
	


		

	

		

			

	
		

			
		
			

	
			
					Dorian Kind
					
				
		


		
	
		

	
	

	
		

			
		
				
		
	

	

	
			
				
		
		
			
		
		
		Level 1
		
		
		
		
		
	
			
		

		
			
					
		

			Level 1
		

	
				
		
			
					

	
		In response to craig.beck
	
	


				
		
	
		

	
	


		

			

	
		
			
		
			
					
		

			
    

	
		
		
		‎10-14-2013
	
		
		07:33 AM
	
	

	
	
	
	
	
	
	
	
	
	
	
	

		

	
				
		
	
	


		

	

		

			

	
		
			
					
		

	
		

			
				
					
					
						
Thanks for your reply! Regarding multicast over the AP, I can ping a multicast address from the WiFi and receive answers from hosts on the wired network, but that's it. It seems like the AP doesn't consider any wireless host to be member of any multicast group.
If you need some more detailed testing, I'll gladly perform any diagnostics you'd need, I've also tried some iperf measurements using multicast traffic and had basically the same results.
If it's of any interest, here's the current IGMP snooping configuration (VLAN 99 is a guest network that's completely isolated from the rest, so I doubt it has any influence, but I've included it here for the sake of completeness):
cisco-pro>show ip igmp snooping 
Global IGMP Snooping configuration:
-----------------------------------
IGMP snooping             : Disabled
IGMPv3 snooping           : Disabled
Report suppression        : Disabled
TCN solicit query         : Disabled
TCN flood query count     : 2
Vlan 10:
--------
IGMP snooping                       : Disabled
IGMPv2 immediate leave              : Disabled
Explicit host tracking              : Enabled
Multicast router learning mode      : pim-dvmrp
Vlan 99:
--------
IGMP snooping                       : Disabled
IGMPv2 immediate leave              : Disabled
Explicit host tracking              : Enabled
Multicast router learning mode      : pim-dvmrp

					
				
			
			
				
			
			
				
			
			
			
			
			
			
		

		
		
	

	
	


	
				
		
			
					
		
	
				
		
			
					
		
	
				
		
			
					
		
	
				
		
			
					
		
			
		
	
				
		
			
					
		
	
				
		
			
					
				
		
			
		
			
					
			
		
				
		
	
	


		

	

		

			

	
		
			
					

	
			

				
		
			
		
			
				

					
						
	
			0
		

	Helpful

					
				

			
			
		

	
		
    	
		

			
				
					
				
				
			
		

	
    
			

		

	

	

	

    

	

	


				
		
	
	


		

			

	
		
			
					
				
		
			
		
			
		
	
	


		

	

		

			

	
		
			
					
				
		
			
					
				
		
			
					
		
	
				
		
			
					
		
	
				
		
	
	


		

	



		

	

	

	




			
		
    
            

                

            

        

	
		

		
	

	

	



	
                

                
				
            
        
    

    
        


	
			
				

					
						

							
		

			

	
			
				
					
				
				
			
		


		

	
							

								
								
							

							

								

	
									
								


							

						

					
				

			
		
	


    
    
        
        
            
        
        
	
    

	

	

	

	

	



				
			
		
		
	
	


		

			

	
		
			        

		
				

        

	


		
			
 
 

		
			
		
			

		
			



  

    

      

        

          
Customers Also Viewed These Support Documents

        

        

          

            

              

                

                  
                

              

            

          

        

      

    

    

      
 

    

  




		
			
		
			    

  

		
					
Review Cisco Networking for a $25 gift card