Anyconnect NAM shows " Limited or no connectivity" warning
In our deployment, few of the users are getting "Limited or No connectivity" warning in anyconnect NAM. Though there is no impact on his connectivity, the user gets proper IP address and he is able to ping his gateway from his system. But this warning is confusing the user about their connection. We have tried all possible steps as below:
1. Ensured Wired AutoConfig service is stopped for smooth working of Anyconnect NAM.
2. Updated the driver version.
3.Changed the Intel driver property of 802.11 n/ac Wireless mode to 802.11 n. It removed the warning for some time, but user again got it other day.
Attaching the DART bundle from one of the user's machine and the screenshots. Can someone please help if they have come with this issue.
Table of Contents
Table of ContentsOverviewConnecting a Catalyst 9800 WLC to Cisco DNA Center ManuallyConnecting an AireOS WLC to Cisco DNA Center ManuallyCisco DNA Center Assurance Deployment Guide References
The purpose of this document...
Securing devices without 802.1X
PSK (Pre-Shared-Key) WLAN is widely used for consumer & enterprise IoT onboarding as most of IoT device doesn’t support 802.1X. While PSK WLAN provides an easy way to onboard IoT, it also introduces challenges as...
Due to the certificate expiration, any new Control and Provisioning of Wireless Access Points (CAPWAP) or Light Weight Access Point Protocol (LWAPP) connection will fail to establish. The main feature that is affected will be the Acce...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...