04-20-2013 06:32 AM - edited 07-03-2021 11:56 PM
Hi,
I have upgraded my WLC 5508 from 7.0 to 7.4 and the AP 1310 no longer can associate to WLC.
Seems that the AP doesn't work with WLC ver 7.4
Except changing these APs to autonomous mode, any other alternatives?
Besides, if we change them to autonomous mode, can Prime Infrastructure manage/monitor these APs?
thanks.
04-20-2013 07:06 AM
The 1310 last support is on v7.0.x of the WLC. See the matrix below.
http://www.cisco.com/en/US/docs/wireless/controller/5500/tech_notes/Wireless_Software_Compatibility_Matrix.html
Prime Infrastructure can monitor the Autonomous access point but will not do anything else than monitor. Config changes is done via the bridge/AP itself.
Sent from Cisco Technical Support iPhone App
04-21-2013 06:12 AM
Hello Melany,
The 1310 AP does not support 7.4.
Yes, Prime Infrastructure monitor these APs.
Hope this will help
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: