PORT CHANNEL ISSUE

[khurram1987]

i have WLC 4400 series and i have configured port channel its four ports with my core.problem is when i apply port chanel on it it turns down and core log shows that

extende: %EC-SP-5-CANNOT_BUNDLE2: Gi2/6 is not compatible with Po5 and will be suspended (vlan mask is different

my mode on core is auto and in wlc its also auto

can you please solve my problem..

thanks

[Leo Laohoo]

Post the config of PO5 as well as the config of Gi2/6.

[Scott Fella]

The mode should be 'ON'

channel-group 5 mode on

Ethernet load balancing should be src-dst-ip

show etherchannel load-balance
port-channel load-balance src-dst-ip

Sent from Cisco Technical Support iPhone App

[khurram1987]

Fella thanks for your suggestion ...tell me what mode should be on WLC...??

current is AUTO....

[Yahya Jaber]

On WLC, just enable LAG.

on the switch, as Scott said.