AP 1832i stuck on boot

[orangel2905]

Hi guy,

I have a AP 1830 series and for some reason is not booting. I'm getting the following message at the end of the lines and then it restart itself:

RES CFG support wmi_service_bitmap 9778

Sending EXT resource cfg: HOST PLATFORM as 0 and fw_feature_bitm

[Leo Laohoo]

For obvious reason, no one can provide any assistance without any useful information. 

Connect a console cable to the AP and reboot the AP.  We want to see the entire boot-up process and events after that.

[orangel2905]

Here is the entire boot process:

Welcome to Cisco.

Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html

This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

This product contains some software licensed under the
"GNU General Public License, version 3" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, Version 3", available here:
http://www.gnu.org/licenses/gpl.html.

[*01/01/1970 00:00:16.5750] Made it into bootsh: Dec 5 2016 18:51:09
[*01/01/1970 00:00:16.5750] bootsh build T-b437e13e36d7f9e45776ba1dd26ebfdf25d90348-gb437e13e-kalairam
[*01/01/1970 00:00:18.1245] /init: reading file /storage/config: No such file or directory
init started: BusyBox v1.20.2 (2016-12-05 18:25:28 PST)
/usr/bin/serial_logincheck: reading file /storage/config: No such file or directory

User Access Verification
Username: [*01/01/1970 00:00:19.9439] Active version: 8.2.141.0
[*01/01/1970 00:00:19.9439] Backup version: 8.2.151.0
[*01/01/1970 00:00:20.0939] AP1852I
[*01/01/1970 00:00:20.1838] nss_driver - Turbo Support 1
[*01/01/1970 00:00:20.1838] Supported Frequencies - 110Mhz 550Mhz 733Mhz
[*01/01/1970 00:00:20.2938]
[*01/01/1970 00:00:20.2938] phy_value=0: org="0x1000" phy_reg="0x1800"
[*01/01/1970 00:00:20.6637] Current value of FACTORY_RESET=0
[*01/01/1970 00:00:20.6737] Last reload time: Sep 12 09:55:04 2021
[*09/12/2021 09:55:04.0000] Setting system time Sun Sep 12 09:55:04 UTC 2021
[*09/12/2021 09:55:04.0799] device wired0 entered promiscuous mode
[*09/12/2021 09:55:04.1599] device wired1 entered promiscuous mode
[*09/12/2021 09:55:04.1599]
[*09/12/2021 09:55:04.1599] phy_value=0: org="0x1800" phy_reg="0x1800"
[*09/12/2021 09:55:04.5198] stile_lm_ft_corsica: module license [09/12/2021 09:55:04.5398] stile module dp init successfully
[09/12/2021 09:55:04.6398] NBAR Label:BLD_MCP_DEV_LATEST_20150424_123021 NBAR VERSION:module build date: Nov 4 2015 at 14:26:22
'Copyright (c) 2014-2015 by cisco Systems, Inc.' taints kernel.
[*09/12/2021 09:55:04.5398] stile_lm_dp_corsica: module license 'Copyright (c) 2014-2015 by cisco Systems, Inc.' taints kernel.
[*09/12/2021 09:55:05.1596]
[*09/12/2021 09:55:05.1696] boot 93 build T-b437e13e36d7f9e45776ba1dd26ebfdf25d90348-gb437e13e-kalairam board corsica mac 2C:0B:E9:C8:17:10
[*09/12/2021 09:55:05.1696] Module: aptrace .text=0xbf000000 data=0xbf0069c0 bss=0xbf006cf8
[*09/12/2021 09:55:05.1696] Module: qca_nss_gmac .text=0xbf00f000 data=0xbf015af8 bss=0xbf015fb8
[*09/12/2021 09:55:05.1696] Module: qca_nss_drv .text=0xbf01f000 data=0xbf0367b0 bss=0xbf037560
[*09/12/2021 09:55:05.1696] Module: qca_nss_capwapmgr .text=0xbf053000 data=0xbf056b6c bss=0xbf056cc0
[*09/12/2021 09:55:05.1696] Module: nssmgrctl .text=0xbf05c000 data=0xbf05d728 bss=0xbf05da4c
[*09/12/2021 09:55:05.1696] Module: proclikefs .text=0xbf063000 data= bss=0xbf063b40
[*09/12/2021 09:55:05.1696] Module: stile_lm_ft .text= data= bss=
[*09/12/2021 09:55:05.1696] Module: stile_lm_dp .text= data= bss=
[*09/12/2021 09:55:05.1696] Module: qca_nss_profile_drv .text=0xbf8ce000 data=0xbf8cf324 bss=0xbf8cf498
[*09/12/2021 09:55:05.4995] Last reload reason : 0: unknown
[*09/12/2021 09:55:06.7291] adf: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7291] asf: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7391] ath_hal: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7491] ath_dfs: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7491] ath_rate_atheros: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7591] ath_dev: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7891]
[*09/12/2021 09:55:06.7891] __ol_ath_attach() Allocated scn c3b00480
[*09/12/2021 09:55:06.7991] Chip id: 0x9, chip version: 0x1000000
[*09/12/2021 09:55:06.7991]
[*09/12/2021 09:55:06.7991] Target Version is 1000000
[*09/12/2021 09:55:06.7991]
[*09/12/2021 09:55:06.7991] Flash Download Address c0000
[*09/12/2021 09:55:06.7991] ol_transfer_bin_file: flash data file defined
[*09/12/2021 09:55:06.7991] Cal location [0]: 00000000
[*09/12/2021 09:55:06.7991]
[*09/12/2021 09:55:06.7991] Wifi0 NAND FLASH Select OFFSET 0x1000
[*09/12/2021 09:55:06.8191] qc98xx_verify_checksum: flash checksum passed: 0x a2f
[*09/12/2021 09:55:06.8191] ol_transfer_bin_file 4017: Download Flash data len 12064
[*09/12/2021 09:55:06.8391]
[*09/12/2021 09:55:06.8391] Board data initialized
[*09/12/2021 09:55:06.8791] ol_ath_download_firmware :First OTP download and Execute is good address:0xa000 return param 4660
[*09/12/2021 09:55:06.8791] ol_ath_download_firmware:##Board Id 8 , CHIP Id 1
[*09/12/2021 09:55:06.8791] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/boardData_AR900B_CUS260_negative_pwr_offset_2G_v2_008.bin
[*09/12/2021 09:55:06.9591]
[*09/12/2021 09:55:06.9591] [Flash] : Ignore Module param
[*09/12/2021 09:55:06.9691] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[*09/12/2021 09:55:06.9891] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
[*09/12/2021 09:55:08.0887] Startup Mode-0 set
[*09/12/2021 09:55:08.0887] HTC Service:0x0300 ep:1 TX flow control disabled
[*09/12/2021 09:55:08.0887] HTC Service:0x0100 ep:2 TX flow control disabled
[*09/12/2021 09:55:08.0887] Firmware_Build_Number:84
[*09/12/2021 09:55:08.0887] host/RAM_fw Build Ver Mismatch: H:0x47, F:0x54 !
[*09/12/2021 09:55:08.0887] num_rf_chain:0x00000004 ht_cap_info:0x0000185b vht_cap_info:0x339a79b2 vht_supp_mcs:0x0000ffea
[*09/12/2021 09:55:08.0887]
[*09/12/2021 09:55:08.0887] RES CFG Support wmi_service_bitmap 9778
[*09/12/2021 09:55:08.0887]
[*09/12/2021 09:55:08.0887] Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitm

[Leo Laohoo]

No, that is not the entire boot-up process.  The top bit is missing (and there are juicy parts there).  

Try again.  

[orangel2905]

You're right!

U-Boot 2012.07 (btldr release 25) (Aug 19 2016 - 13:54:18)

This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

DRAM: 1 GiB
NAND (ONFI): Detected SPANSION S34MS02G2 [256 MiB]
SF: Detected Macronix MX25U3235F [4 MiB]
MFG data loaded
Scanning shenv data blocks
Total valid parts=4
Active shenv part[1:0], write_counter=19
PCI0 Link Intialized
PCI1 Link Intialized
Net:
PHY ID = 0x4dd074, eth0 found AR8033 PHY
PHY ID = 0x4dd074, eth1 found AR8033 PHY
Valid I2C chip addresses: 51 52
AP 1832/1852 detected...
Power Type: 802.3af POE or Others detected...
Signature returns 0
BL signing verification success, continue to run...
Auto boot mode, use bootipq directly
Hit ESC key to stop autoboot: 0
Specified BOOT: part1

Booting from part1

Read 1024 bytes from volume part1 to 45000000
Read 19416728 bytes from volume part1 to 45000000
Signature returns 0
Image signing verification success, continue to run...
Using machid 0x1260 from environment

Starting image ...

[01/01/1970 00:00:00.0000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
[01/01/1970 00:00:00.0000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[01/01/1970 00:00:00.0000] Machine: Cisco Systems 11ac Wave2 Wifi Access Point
[01/01/1970 00:00:00.0000] Memory policy: ECC disabled, Data cache writealloc
[01/01/1970 00:00:00.0000] Kernel command line: ubi.mtd=0 crashkernel=30M@1280M console=ttyHSL1,9600n8 activepart=part1 activeboot=0 wdgtriggered=0
[01/01/1970 00:00:00.1500] CPU1: Booted secondary processor
[01/01/1970 00:00:10.8767] msm_serial_hs: probe of msm_serial_hs.0 failed with error -2
[01/01/1970 00:00:11.5365] buginf tty flushing thread started, ttyport=ef5f9e90
[01/01/1970 00:00:16.1851] msm_hsusb_host msm_hsusb_host: unable to find transceiver
[01/01/1970 00:00:16.3150] watchdog: only one watchdog can use /dev/watchdog
[01/01/1970 00:00:16.3850] watchdog: error registering /dev/watchdog (err=-16)
[*01/01/1970 00:00:16.5650] buginf() enabled.

Welcome to Cisco.

Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html

This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

This product contains some software licensed under the
"GNU General Public License, version 3" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, Version 3", available here:
http://www.gnu.org/licenses/gpl.html.

[*01/01/1970 00:00:16.5750] Made it into bootsh: Dec 5 2016 18:51:09
[*01/01/1970 00:00:16.5750] bootsh build T-b437e13e36d7f9e45776ba1dd26ebfdf25d90348-gb437e13e-kalairam
[*01/01/1970 00:00:18.1245] /init: reading file /storage/config: No such file or directory
init started: BusyBox v1.20.2 (2016-12-05 18:25:28 PST)
/usr/bin/serial_logincheck: reading file /storage/config: No such file or directory

User Access Verification
Username: [*01/01/1970 00:00:19.9439] Active version: 8.2.141.0
[*01/01/1970 00:00:19.9439] Backup version: 8.2.151.0
[*01/01/1970 00:00:20.0939] AP1852I
[*01/01/1970 00:00:20.1838] nss_driver - Turbo Support 1
[*01/01/1970 00:00:20.1838] Supported Frequencies - 110Mhz 550Mhz 733Mhz
[*01/01/1970 00:00:20.2938]
[*01/01/1970 00:00:20.2938] phy_value=0: org="0x1000" phy_reg="0x1800"
[*01/01/1970 00:00:20.6637] Current value of FACTORY_RESET=0
[*01/01/1970 00:00:20.6737] Last reload time: Sep 12 09:55:04 2021
[*09/12/2021 09:55:04.0000] Setting system time Sun Sep 12 09:55:04 UTC 2021
[*09/12/2021 09:55:04.0799] device wired0 entered promiscuous mode
[*09/12/2021 09:55:04.1599] device wired1 entered promiscuous mode
[*09/12/2021 09:55:04.1599]
[*09/12/2021 09:55:04.1599] phy_value=0: org="0x1800" phy_reg="0x1800"
[*09/12/2021 09:55:04.5198] stile_lm_ft_corsica: module license [09/12/2021 09:55:04.5398] stile module dp init successfully
[09/12/2021 09:55:04.6398] NBAR Label:BLD_MCP_DEV_LATEST_20150424_123021 NBAR VERSION:module build date: Nov 4 2015 at 14:26:22
'Copyright (c) 2014-2015 by cisco Systems, Inc.' taints kernel.
[*09/12/2021 09:55:04.5398] stile_lm_dp_corsica: module license 'Copyright (c) 2014-2015 by cisco Systems, Inc.' taints kernel.
[*09/12/2021 09:55:05.1596]
[*09/12/2021 09:55:05.1696] boot 93 build T-b437e13e36d7f9e45776ba1dd26ebfdf25d90348-gb437e13e-kalairam board corsica mac 2C:0B:E9:C8:17:10
[*09/12/2021 09:55:05.1696] Module: aptrace .text=0xbf000000 data=0xbf0069c0 bss=0xbf006cf8
[*09/12/2021 09:55:05.1696] Module: qca_nss_gmac .text=0xbf00f000 data=0xbf015af8 bss=0xbf015fb8
[*09/12/2021 09:55:05.1696] Module: qca_nss_drv .text=0xbf01f000 data=0xbf0367b0 bss=0xbf037560
[*09/12/2021 09:55:05.1696] Module: qca_nss_capwapmgr .text=0xbf053000 data=0xbf056b6c bss=0xbf056cc0
[*09/12/2021 09:55:05.1696] Module: nssmgrctl .text=0xbf05c000 data=0xbf05d728 bss=0xbf05da4c
[*09/12/2021 09:55:05.1696] Module: proclikefs .text=0xbf063000 data= bss=0xbf063b40
[*09/12/2021 09:55:05.1696] Module: stile_lm_ft .text= data= bss=
[*09/12/2021 09:55:05.1696] Module: stile_lm_dp .text= data= bss=
[*09/12/2021 09:55:05.1696] Module: qca_nss_profile_drv .text=0xbf8ce000 data=0xbf8cf324 bss=0xbf8cf498
[*09/12/2021 09:55:05.4995] Last reload reason : 0: unknown
[*09/12/2021 09:55:06.7291] adf: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7291] asf: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7391] ath_hal: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7491] ath_dfs: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7491] ath_rate_atheros: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7591] ath_dev: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7891]
[*09/12/2021 09:55:06.7891] __ol_ath_attach() Allocated scn c3b00480
[*09/12/2021 09:55:06.7991] Chip id: 0x9, chip version: 0x1000000
[*09/12/2021 09:55:06.7991]
[*09/12/2021 09:55:06.7991] Target Version is 1000000
[*09/12/2021 09:55:06.7991]
[*09/12/2021 09:55:06.7991] Flash Download Address c0000
[*09/12/2021 09:55:06.7991] ol_transfer_bin_file: flash data file defined
[*09/12/2021 09:55:06.7991] Cal location [0]: 00000000
[*09/12/2021 09:55:06.7991]
[*09/12/2021 09:55:06.7991] Wifi0 NAND FLASH Select OFFSET 0x1000
[*09/12/2021 09:55:06.8191] qc98xx_verify_checksum: flash checksum passed: 0x a2f
[*09/12/2021 09:55:06.8191] ol_transfer_bin_file 4017: Download Flash data len 12064
[*09/12/2021 09:55:06.8391]
[*09/12/2021 09:55:06.8391] Board data initialized
[*09/12/2021 09:55:06.8791] ol_ath_download_firmware :First OTP download and Execute is good address:0xa000 return param 4660
[*09/12/2021 09:55:06.8791] ol_ath_download_firmware:##Board Id 8 , CHIP Id 1
[*09/12/2021 09:55:06.8791] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/boardData_AR900B_CUS260_negative_pwr_offset_2G_v2_008.bin
[*09/12/2021 09:55:06.9591]
[*09/12/2021 09:55:06.9591] [Flash] : Ignore Module param
[*09/12/2021 09:55:06.9691] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[*09/12/2021 09:55:06.9891] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
[*09/12/2021 09:55:08.0887] Startup Mode-0 set
[*09/12/2021 09:55:08.0887] HTC Service:0x0300 ep:1 TX flow control disabled
[*09/12/2021 09:55:08.0887] HTC Service:0x0100 ep:2 TX flow control disabled
[*09/12/2021 09:55:08.0887] Firmware_Build_Number:84
[*09/12/2021 09:55:08.0887] host/RAM_fw Build Ver Mismatch: H:0x47, F:0x54 !
[*09/12/2021 09:55:08.0887] num_rf_chain:0x00000004 ht_cap_info:0x0000185b vht_cap_info:0x339a79b2 vht_supp_mcs:0x0000ffea
[*09/12/2021 09:55:08.0887]
[*09/12/2021 09:55:08.0887] RES CFG Support wmi_service_bitmap 9778
[*09/12/2021 09:55:08.0887]
[*09/12/2021 09:55:08.0887] Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitm

[Leo Laohoo]

---

@orangel2905 wrote:

Hit ESC key to stop autoboot: 5

---

When the AP boots up to this point, hit the ESC button. 

The cursor will change to "u-boot>>".  Then do the following: 

setenv BOOT part2
saveenv

NOTE: 

If setenv/saveenv is not a valid command, then try an alternative command: 

setshenv BOOT part2
saveshenv

[orangel2905]

Hi Leo,

I've changed the value you mentioned it stuck in the same line.

U-Boot 2012.07 (btldr release 25) (Aug 19 2016 - 13:54:18)

This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

DRAM: 1 GiB
NAND (ONFI): Detected SPANSION S34MS02G2 [256 MiB]
SF: Detected Macronix MX25U3235F [4 MiB]
MFG data loaded
Scanning shenv data blocks
Total valid parts=4
Active shenv part[1:1], write_counter=20
PCI0 Link Intialized
PCI1 Link Intialized
Net:
PHY ID = 0x4dd074, eth0 found AR8033 PHY
PHY ID = 0x4dd074, eth1 found AR8033 PHY
Valid I2C chip addresses: 51 52
AP 1832/1852 detected...
Power Type: Power Brick detected...
Signature returns 0
BL signing verification success, continue to run...
Auto boot mode, use bootipq directly
Hit ESC key to stop autoboot: 0
Specified BOOT: part2

Booting from part2

Read 1024 bytes from volume part2 to 45000000
Read 19490143 bytes from volume part2 to 45000000
Signature returns 0
Image signing verification success, continue to run...
Using machid 0x1260 from environment

Starting image ...

[01/01/1970 00:00:00.0000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5387d
[01/01/1970 00:00:00.0000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[01/01/1970 00:00:00.0000] Machine: Cisco Systems 11ac Wave2 Wifi Access Point
[01/01/1970 00:00:00.0000] Memory policy: ECC disabled, Data cache writealloc
[01/01/1970 00:00:00.0000] Kernel command line: ubi.mtd=0 crashkernel=30M@1280M console=ttyHSL1,9600n8 activepart=part2 activeboot=0 wdgtriggered=0
[01/01/1970 00:00:00.1500] CPU1: Booted secondary processor
[01/01/1970 00:00:15.8852] ACPU PVS: 1
[01/01/1970 00:00:16.0151] msm_serial_hs: probe of msm_serial_hs.0 failed with error -2
[01/01/1970 00:00:16.7149] buginf tty flushing thread started, ttyport=ef508490
[01/01/1970 00:00:21.3835] msm_hsusb_host msm_hsusb_host: unable to find transceiver
[*01/01/1970 00:00:21.6034] buginf() enabled.

Welcome to Cisco.

Usage of this device is governed by Cisco's End User License Agreement,
available at:
http://www.cisco.com/c/en/us/td/docs/general/warranty/English/EU1KEN_.html.

Restricted Rights Legend

Use, duplication, or disclosure by the Government is subject to
restrictions as set forth in subparagraph (c) of the Commercial
Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and
subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

This product contains some software licensed under the
"GNU General Public License, version 2" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/gpl-2.0.html

This product contains some software licensed under the
"GNU Library General Public License, version 2" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Library
General Public License, version 2", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.0.html

This product contains some software licensed under the
"GNU Lesser General Public License, version 2.1" provided
with ABSOLUTELY NO WARRANTY under the terms of "GNU Lesser
General Public License, version 2.1", available here:
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html

This product contains some software licensed under the
"GNU General Public License, version 3" provided with
ABSOLUTELY NO WARRANTY under the terms of
"GNU General Public License, Version 3", available here:
http://www.gnu.org/licenses/gpl.html.

[*01/01/1970 00:00:21.6134] Made it into bootsh: Mar 14 2017 13:10:04
[*01/01/1970 00:00:21.6134] bootsh build T-3bef165fd4988f5ab7c2e5c32b6c5048b7494d95-g3bef165f-kalairam
[*01/01/1970 00:00:23.1729] /init: reading file /storage/config: No such file or directory
init started: BusyBox v1.20.2 (2017-03-14 12:40:47 PDT)
/usr/bin/serial_logincheck: reading file /storage/config: No such file or directory

User Access Verification
Username: [*01/01/1970 00:00:25.0023] Active version: 8.2.151.0
[*01/01/1970 00:00:25.0023] Backup version: 8.2.141.0
[*01/01/1970 00:00:25.1623] AP1852I
[*01/01/1970 00:00:25.2422] nss_driver - Turbo Support 1
[*01/01/1970 00:00:25.2422] Supported Frequencies - 110Mhz 550Mhz 733Mhz
[*01/01/1970 00:00:25.7521] Current value of FACTORY_RESET=0
[*01/01/1970 00:00:25.7621] Last reload time: Sep 12 09:55:04 2021
[*09/12/2021 09:55:04.0000] Setting system time Sun Sep 12 09:55:04 UTC 2021
[*09/12/2021 09:55:04.0599] device wired0 entered promiscuous mode
[*09/12/2021 09:55:04.1299] device wired1 entered promiscuous mode
[*09/12/2021 09:55:04.1299]
[*09/12/2021 09:55:04.1299] phy_value=0: org="0x1000" phy_reg="0x1800"
[*09/12/2021 09:55:04.4399] stile_lm_ft_corsica: module license [09/12/2021 09:55:04.4698] stile module dp init successfully
'Copyright (c) 2014-2015 by cisco Systems, Inc.' taints kernel.
[09/12/2021 09:55:04.5698] NBAR Label:BLD_MCP_DEV_LATEST_20150424_123021 NBAR VERSION:module build date: Nov 4 2015 at 14:26:22
[*09/12/2021 09:55:04.4599] stile_lm_dp_corsica: module license 'Copyright (c) 2014-2015 by cisco Systems, Inc.' taints kernel.
[*09/12/2021 09:55:05.1596] miibus get eec65800!
[*09/12/2021 09:55:05.1796]
[*09/12/2021 09:55:05.1896] boot 94 build T-3bef165fd4988f5ab7c2e5c32b6c5048b7494d95-g3bef165f-kalairam board corsica mac 2C:0B:E9:C8:17:10
[*09/12/2021 09:55:05.1896] Module: aptrace .text=0xbf000000 data=0xbf00803c bss=0xbf008440
[*09/12/2021 09:55:05.1896] Module: qca_nss_gmac .text=0xbf00f000 data=0xbf015af8 bss=0xbf015fb8
[*09/12/2021 09:55:05.1896] Module: qca_nss_drv .text=0xbf01f000 data=0xbf0367b0 bss=0xbf037560
[*09/12/2021 09:55:05.1896] Module: qca_nss_capwapmgr .text=0xbf053000 data=0xbf056b6c bss=0xbf056cc0
[*09/12/2021 09:55:05.1896] Module: nssmgrctl .text=0xbf05c000 data=0xbf05d728 bss=0xbf05da4c
[*09/12/2021 09:55:05.1896] Module: proclikefs .text=0xbf063000 data= bss=0xbf063b40
[*09/12/2021 09:55:05.1896] Module: stile_lm_ft .text= data= bss=
[*09/12/2021 09:55:05.1896] Module: stile_lm_dp .text= data= bss=
[*09/12/2021 09:55:05.1896] Module: qca_nss_profile_drv .text=0xbf8d3000 data=0xbf8d4324 bss=0xbf8d4498
[*09/12/2021 09:55:05.1896] Module: ssdk_reg .text=0xbf8d9000 data= bss=0xbf8d9838
[*09/12/2021 09:55:05.5395] Last reload reason : 0: unknown
[*09/12/2021 09:55:06.7691] adf: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7691] asf: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7691] ath_hal: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7791] ath_dfs: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7891] ath_rate_atheros: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.7891] ath_dev: module license 'Proprietary' taints kernel.
[*09/12/2021 09:55:06.8191]
[*09/12/2021 09:55:06.8191] __ol_ath_attach() Allocated scn c3b40480
[*09/12/2021 09:55:06.8291] Chip id: 0x9, chip version: 0x1000000
[*09/12/2021 09:55:06.8291]
[*09/12/2021 09:55:06.8291] Target Version is 1000000
[*09/12/2021 09:55:06.8291]
[*09/12/2021 09:55:06.8291] Flash Download Address c0000
[*09/12/2021 09:55:06.8291] ol_transfer_bin_file: flash data file defined
[*09/12/2021 09:55:06.8291] Cal location [0]: 00000000
[*09/12/2021 09:55:06.8291]
[*09/12/2021 09:55:06.8291] Wifi0 NAND FLASH Select OFFSET 0x1000
[*09/12/2021 09:55:06.8491] qc98xx_verify_checksum: flash checksum passed: 0x a2f
[*09/12/2021 09:55:06.8491] ol_transfer_bin_file 4020: Download Flash data len 12064
[*09/12/2021 09:55:06.8691]
[*09/12/2021 09:55:06.8691] Board data initialized
[*09/12/2021 09:55:06.9191] ol_ath_download_firmware :First OTP download and Execute is good address:0xa000 return param 4660
[*09/12/2021 09:55:06.9191] ol_ath_download_firmware:##Board Id 8 , CHIP Id 1
[*09/12/2021 09:55:06.9191] ol_transfer_bin_file: Board Data File download to address=0xc0000 file name=AR900B/hw.2/boardData_AR900B_CUS260_negative_pwr_offset_2G_v2_008.bin
[*09/12/2021 09:55:06.9891]
[*09/12/2021 09:55:06.9891] [Flash] : Ignore Module param
[*09/12/2021 09:55:06.9991] ol_ath_download_firmware : Second OTP download and Execute is good, param=0x0
[*09/12/2021 09:55:07.0191] ol_transfer_bin_file: Downloading firmware file: AR900B/hw.2/athwlan.bin
[*09/12/2021 09:55:08.1287] Startup Mode-0 set
[*09/12/2021 09:55:08.1287] HTC Service:0x0300 ep:1 TX flow control disabled
[*09/12/2021 09:55:08.1287] HTC Service:0x0100 ep:2 TX flow control disabled
[*09/12/2021 09:55:08.1287] Firmware_Build_Number:84
[*09/12/2021 09:55:08.1287] host/RAM_fw Build Ver Mismatch: H:0x47, F:0x54 !
[*09/12/2021 09:55:08.1287] num_rf_chain:0x00000004 ht_cap_info:0x0000185b vht_cap_info:0x339a79b2 vht_supp_mcs:0x0000ffea
[*09/12/2021 09:55:08.1287]
[*09/12/2021 09:55:08.1287] RES CFG Support wmi_service_bitmap 9778
[*09/12/2021 09:55:08.1287]
[*09/12/2021 09:55:08.1287] Sending Ext resource cfg: HOST PLATFORM as 0 and fw_feature_bitm

[Leo Laohoo]

So after that last line the AP does nothing but reboots/crashes?

[orangel2905]

That's right! It just reboots itself.

[Leo Laohoo]

Contact Cisco TAC and get the AP RMA-ed.