AP 3702 power issue

[sridhar ch]

Hi,

i am getting the below message, pls advise. AP is  connected to cisco 4510R+E.

Message: Access point 'AP3702E-01' associated with controller 'WLC2504-01' draws low power from Ethernet. Failure reason: 'The AP draws 15.4 watts from Ethernet'.

SW4510-01#sh power inline | in Gi3/23

Gi3/23 auto on 17.7 16.8 AIR-CAP3702I-D-K9 4

[Leo Laohoo]

Can you assign static PoE value to the port?