I use Cisco Aironet AP 1100 Series (System Software Version: 12.2(13)JA4)
and wireless card: Cisco Systems 350 Series PCMCIA Wireless LAN Adapter. I
must test vlan's on this AP locally (I have got one AP and one wireless
card only, no switch is available).
I 've got a problem with vlans. I've done everything like it has been
written at doc: Cisco IOS Software Configuration Guide for Cisco Aironet
Access Points, 12.2(13)JA, chapter: Configuring VLANs. After configuring
the card associate to all SSIDs but I can't 'ping' AP and open AP web
interface. I can do this only when I set one of vlans as NATIVE (but the
SSID which hasn't native VLAN still doesn't work).
Could you tell me what else I should set?
When I use DHCP (wireless card details, SSID associated with no native VLAN) I can't obtain IP address. When SSID is associated with native VLAN the problem disappear.
