Wireless

Hi,My enterprise is having 1010 Lightweight Access Points. I have one Access Point with MAC id, say 0001 2345 6780. My security team has done a AP MAC footprinting in my campus. During wireless footprinting exercise (using NetStumbler ver 0.4.0 build...

I'm trying to understand if it is possible to terminate different WLANs (SSIDs) on a corporate network to different WLCs. Let me elaborate: I have a load of APs across a number of floors in a building, and want to deploy different SSIDs, each with di...

Cisco WLC 4404 - 4.0.155.1AP 1242We have AP's that broadcast multiple SSIDs. In one specific area of the building, we have noticed the signal strengths are not the same for different WLANs/SSIDs. For example, a WLAN with SSID "Public WiFi" may have v...

Is there a more granular way of enforcing Session Timeout for users on the WLC?When I use Cisco BBSM with my radius server, the session-timeout value is honored and I could set time of day restrictions within Radius for myt Guest users.However, with ...

Hi,Can anybody help me in finding out reseach papers on "WLAN Security in 802.11b/g". I want to have some research papers collected for my Masters. Not necessary Cisco specific papers are required. Please help.Best Regards,Rahim Amir Ali

What is the appropriate authentication type for continuously connected apps? I recently implemented a wireless solution using 1240AGs, 4425 controllers and WLC.I?m testing intermec CK31 handhelds connected to an oracle telnet based WMS. I have WPA2+A...

Hello every one,I am trying to configure Wireless with SDM and all my patience (it is so long after you click on apply !!). I am using a 2801 router. So when I try to create a SSID with a Vlan on my 802.11g (Routing), I fill in everything according t...

Hey,I don't know if this is the best forum for my questions, and if not please direct me to one that better suits my needs. I was simply referred to this forum through another one. Anyhow, me and my friend are attempting to build our own wifi antenna...

Two WLC4402 (Version 4.1.171.0)with AP1010's.AP Fallback Enabled. RF Group and Mobility group set correctly.Sysname used to define Primary and Secondary.Everything works except 'falling' back to the primary when it comes back online.Does anyone have ...

I have a customer that wants outdoor wireless, and looking to deploy the 1510.How do i perform the site survey, and with what equipments. Is there a tool that I can use to satisfy the customer, that the locations I plan to install the 1510 will give ...

Hello,my Aironet 1100 has the red-green-red leds on, how can i replace the IOS, how can i access it, i'm having problems using Ethernet?thanks

Hi Sir,I have deployed a pair of WLC4404-100 in a Mobility Group. The WLCs' software version is 4.0.179.8. L3 LWAPP transport mode is configured. There are 50 Lightweight APs joined to the primary controller, in an office building.Each floor has a mi...