Good Afternoon,
I am hoping someone has a quick answer on how to resolve or better understand what oculd be going on with our DCA configuration and an Flex Connect AP.
Currently we have 3 - 3602i's configured in flex connect mode. These AP's cover a 3600-4000 sq. ft. area.
I have worked on eliminating some lower data rates and messed with Power Levels to better tune the RF environment for this site.
I checked the Channel assignments giving for the 2.4ghz network and 2 out of the 3 AP's are both globally set to channel 11. On AP-1 channel 6 has little to no interference or noise detected, so i dont know why the AP hasn't assigned it's self to that channel.
Anything I can do to invoke the AP to recalculate and perform DCA if need be? I dont want to interrupt our other AP's running on this controller.
Thoughts?
