02-07-2013 01:03 PM - edited 07-03-2021 11:29 PM
Quick question, is there any feature in the Air IOS on the WLC or AP that would provide a "location service" or something of that nature?
For example, if you cant find the 10th AP but you can see in managed in your WLC. Maybe a signal that sends a beep to the AP or makes the light flash to help find it.
I have to imagine that something like this exists (so I hope)! If so, is it dependent on firmware code, AP model, WLC model? Any information would be greatly appreciated.
Solved! Go to Solution.
02-07-2013 01:10 PM
config ap led-state flash ?
indefinite Indefinite flashing of the LED
disable Stop flashing the LED
so config ap led-state flash indefinite < ap name >
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
02-07-2013 01:10 PM
config ap led-state flash ?
indefinite Indefinite flashing of the LED
disable Stop flashing the LED
so config ap led-state flash indefinite < ap name >
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
02-08-2013 10:39 AM
Again, thanks for the helpful tip! So just to clarify, there is no such thing as a "noise" location service?
02-08-2013 11:24 AM
not to my knowledge no.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide