06-04-2008 01:55 PM - edited 07-03-2021 03:59 PM
Hi, I have just connected my 1130ag ap to the network noticed that it can not get a Join response. as follows;
bymydesk#
*Mar 1 00:00:25.294: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:35.698: LWAPP_CLIENT_ERROR_DEBUG: spamHandleDiscoveryTimer : Found the disco
very response from MASTER Mwar
*Mar 1 00:00:35.707: %LWAPP-5-CHANGED: LWAPP changed state to JOIN
*Mar 1 00:00:40.707: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the J
oin response
*Mar 1 00:00:40.707: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.
*Mar 1 00:00:40.746: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID
NOT GET JOIN RESPONSE.
*Mar 1 00:00:40.746: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is
I have looked in the forum and other people have had the problem and have indicated it could be a date time issue. I have set the date and time but when I do a "show Auth-list" i get nothing back like the following;
(Cisco Controller) >show auth-list
(Cisco Controller) >
can anyone help please, i am not sure what else to do
Solved! Go to Solution.
07-02-2008 10:56 AM
There is no need for NAT, as the APs have valid IPs.
07-03-2008 03:55 AM
Well if the ap's and the wlc is not behind a NAT, then you have to look at connectivity between the two site. Cisco has their recommendation of what is required if your ap's are across the WAN.
Have you reviewed this doc?
http://www.cisco.com/en/US/products/ps6521/products_tech_note09186a0080736123.shtml#t8
http://www.cisco.com/en/US/products/ps6521/products_tech_note09186a0080736123.shtml
07-03-2008 03:59 AM
tks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide