AP NOT GETTING JOIN RESPONSE??

[mbaylis]

Hi, I have just connected my 1130ag ap to the network noticed that it can not get a Join response. as follows;

bymydesk#

*Mar 1 00:00:25.294: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY

*Mar 1 00:00:35.698: LWAPP_CLIENT_ERROR_DEBUG: spamHandleDiscoveryTimer : Found the disco

very response from MASTER Mwar

*Mar 1 00:00:35.707: %LWAPP-5-CHANGED: LWAPP changed state to JOIN

*Mar 1 00:00:40.707: LWAPP_CLIENT_ERROR_DEBUG: spamHandleJoinTimer: Did not recieve the J

oin response

*Mar 1 00:00:40.707: LWAPP_CLIENT_ERROR_DEBUG: No more AP manager IP addresses remain.

*Mar 1 00:00:40.746: %SYS-5-RELOAD: Reload requested by LWAPP CLIENT. Reload Reason: DID

NOT GET JOIN RESPONSE.

*Mar 1 00:00:40.746: %LWAPP-5-CHANGED: LWAPP changed state to DOWNXmodem file system is

I have looked in the forum and other people have had the problem and have indicated it could be a date time issue. I have set the date and time but when I do a "show Auth-list" i get nothing back like the following;

(Cisco Controller) >show auth-list

(Cisco Controller) >

can anyone help please, i am not sure what else to do

[Leandro Nunes]

There is no need for NAT, as the APs have valid IPs.

[Scott Fella]

Well if the ap's and the wlc is not behind a NAT, then you have to look at connectivity between the two site. Cisco has their recommendation of what is required if your ap's are across the WAN.

Have you reviewed this doc?

http://www.cisco.com/en/US/products/ps6521/products_tech_note09186a0080736123.shtml#t8

http://www.cisco.com/en/US/products/ps6521/products_tech_note09186a0080736123.shtml

[Leandro Nunes]

tks.