cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
921
Views
5
Helpful
3
Replies

AP not sending any beacons but detect rogue APs

thomas.defise
Level 1
Level 1

Hello,

I have deployed a vWLC running on version 8.3.121.0 with an AIR-LAP1142N-E-K9.
The AIR-LAP1142N-E-K9 has successfully joined the vWLC. So I created a WLAN "Test" with the VLAN ID, the VLAN reserved for this LAN.

It seems that my AP is not sending any beacons at all.
He is working because I can see that he detect rogue AP's

I see that both radio as showed as UP and both are with the default settings 

It also seems that the WLAN is correctly enable

Thanks in advance for your answer,

Thomas

1 Accepted Solution

Accepted Solutions

Rasika Nayanajith
VIP Alumni
VIP Alumni

Did you check your AP is in FlexConnect mode ? vWLC not support local mode APs

If it is in Local mode that may be the reason for this behaviour

See below release notes

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn83mr2.html#concept_9D1DCAF2A11D481A9E7D1815AD269819

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

3 Replies 3

Rasika Nayanajith
VIP Alumni
VIP Alumni

Did you check your AP is in FlexConnect mode ? vWLC not support local mode APs

If it is in Local mode that may be the reason for this behaviour

See below release notes

http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn83mr2.html#concept_9D1DCAF2A11D481A9E7D1815AD269819

HTH

Rasika

*** Pls rate all useful responses ***

Hello Rasika,

Thanks, indeed it was that,
Also, what a pleasure to have your blog in order to prepare my CCNA Wireless

Thomas 

Hi Thomas,

Good to hear it was the issue and you able to fix it.

Good luck with your CCNA wireless and we are here to help you. If you come across any thing that needs help , pls drop us a line

Rasika

Review Cisco Networking for a $25 gift card