05-19-2015 06:47 AM - edited 07-05-2021 03:15 AM
Hi Experts,
We are having 5508 WLC with 3602 AP model. Out of 250 AP's , 80-90 AP's automatically going to admin disabled status for every reboot of WLC. After that we have to enable manually for all AP's.
We have upgraded the WLC to 7.6.130.0 . Still issue persists.
Any suggestions on this.
Thanks,
Vijay
05-20-2015 03:18 AM
Symptom:
3600 AP with removable AC module installed on it reboots randomly and come up with admin state disabled. This is happening with most of the APs with AC module in it and not happening with APs without AC module.
No crash file/coredump generated for AP. Unable to see any traceback messages in logs other than new DTLS connection request/response, join request/response, radio up/down events post reboot.
Conditions:
This issue is noticed with 3600APs with AC module installed on it and it is managed by 5508 WLC in 7.6.100.0.
Workaround:
Enabling the admin state manually by getting into each AP on WLC.
05-20-2015 04:59 AM
Thanks a lot for the information .
When I try to open that bug, i am getting the info about the below bug
05-20-2015 05:06 AM
05-20-2015 07:30 AM
This is surely the bug defined above
05-21-2015 02:01 PM
Please refer to the below link :
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-0/configuration/guide/c70/c70lwap.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide