05-31-2015 06:26 AM - edited 07-05-2021 03:19 AM
Hi,
Have Cisco WLC 2504 in HA, I tried to connect the Access point CISCO AP AIR-LAP1131AG-E-K9. Access point have taken IP address from DHCP server and able to ping from WLC.
In WLC it's not joined well. Is this AP model support or not by WLC?
In WLC found the log message like "nterference Profile Failed for Base Radio MAC: 7c:0e:ce:b9:10:80 and slotNo: 0"
WLC software version is 7.6.130.0, Already 3 AP's are connected and working fine.
Regards,
Sivaguru D
05-31-2015 06:31 AM
https://supportforums.cisco.com/discussion/11099501/cisco-4402-lap1131-interference-profile-failed-base-radio-mac
http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
06-01-2015 06:18 AM
Hi,
Initially it was not joined in WLC, we are format (factory reset) the AP then it will connected successfully.
Thanks for your info.
Regards,
Sivaguru D
06-01-2015 12:05 AM
Hi,
Yes this AP support WLC 2504 with 7.6.130.0 image.
Paste the output of these:
From WLC: sh sysinfo
From AP: sh version
also paste the complete bootup process from AP console.
Regards
Don't forget to rate helpful posts
06-01-2015 07:18 PM
Please refer to the link for troubleshooting AP not joining WLC-
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/99948-lap-notjoin-wlc-tshoot.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide