cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1016
Views
0
Helpful
3
Replies

AP support Workgroup bridge

osama1975
Level 1
Level 1

Hi

Could someone help me to inform me that which AP can configure with workgroup bridge because I have plan to connect five sites to the master site via wireless connection.

many thanks

1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame
Basically any AP that has Autonomous image available can support WGB. Look at the access point download section and then check if there is autonomous image.
-Scott
*** Please rate helpful posts ***

View solution in original post

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame
Basically any AP that has Autonomous image available can support WGB. Look at the access point download section and then check if there is autonomous image.
-Scott
*** Please rate helpful posts ***

Take a look at this matrix and look under the Autonomous image. That should help narrow it down.

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#pgfId-147162
-Scott
*** Please rate helpful posts ***

Thanks for your reply
Please I have one question , Could I install APs with different regulatory domain in my country (Libya).Please I would like draw attention I will use them stand alone (Point to Multi-point ).

Review Cisco Networking for a $25 gift card