AP1220B Wireless Upgrade to IOS problem

[vakinode]

I ran into upgrade/conversion problem using the conversion tool to convert my Cisco Access Point firmware to IOS version.

Does anyone knows how to upgrade/convert using the console since the boot files are either corrupt or lost completely during the conversion and I can only access the device through hyperterminal/console port.

Thanks

[paddyxdoyle]

Hi,

The following document outlines how to install the firmware from an IOS image that's not booting, or if you still have VxWorks running

http://www.cisco.com/en/US/products/hw/wireless/ps430/products_tech_note09186a008019fea0.shtml#topic2

Rgds

Paddy

[vakinode]

Thanks for the information. I attempted loading the IOS via mode option from tftp server, the tftp error message is as stated below:

connection received from 10.0.0.1 on port ....Read request for file c1200-k9w7-tar.default. Mode octet....

error 2 in system call CreateFile The system cannot find the file specified

while the console message is as stated below:

examining image...tftp://255.255.255.255/c1200-k9w7-tar.default: connection timeLY DEPLOYMENT RELEASE SO d out

ERROR: Failed to open archive file tftp: