AP1240 and ACS INTEGRATION HELP REQUIRED

[urarindam]

Hi

I need configuration guide to integrate AP and ACS using MAC authentication of Wireless Card..

arindam

[andrew.brazier]

Here's the admin guide for ACS:

http://www.cisco.com/en/US/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.0/user/guide/a.html

[sbhadrav@cisco.com]

Complete these steps in order to configure MAC authentication using a RADIUS server. In this example, the Cisco Secure ACS server is used as the RADIUS server.

Configure a WLAN and Enable MAC Filtering

Configure the RADIUS Server with Client MAC Addresses

Configure a WLAN and Enable MAC Filtering
Complete these steps in order to configure a WLAN with MAC filtering:

Click WLANs from the controller GUI in order to create a WLAN.

The WLANs window appears. This window lists the WLANs configured on the controller.

Click New in order to configure a new WLAN.

In this example, the WLAN is named MAC-ACS-WLAN and the WLAN ID is 2.