05-02-2021 08:52 PM - edited 07-05-2021 01:15 PM
Hello, Catalyst 9800 version and ap 3602 version are below. The ap cannot join the WLC. Cisco Matrix show the ap can join the wlc, but I cannot get it join. The ap can ping wlc. Is there something wrong? Thank you
Catalyst 9800-CL 16.10.1e
LWAPP image version 8.5.161.0
May 3 04:47:20.959: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
Not in Bound state.
May 3 04:48:10.963: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
Writing out the event log to flash:/event.log ...
May 3 04:48:21.271: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio0 due to the reason code 11
May 3 04:48:21.271: %DOT11-5-EXPECTED_RADIO_RESET: Restarting Radio interface Dot11Radio1 due to the reason code 11
May 3 04:48:21.291: %SYS-5-RELOAD: Reload requested by CAPWAP CLIENT. Reload Reason: Could not discover WLC using DHCP IP address, Reload to use static IP.
May 3 04:48:21.307: %LWAPP-5-CHANGED: CAPWAP changed state to DOWN
Write of event.log done
.
Solved! Go to Solution.
05-02-2021 09:31 PM
2600/3600 are not supported on 9800.
3504/5520/8540 are the "last" known WLC to support the 2600/3600.
05-03-2021 07:02 AM
Per the wlc matrix, it is supported.
Cisco Wireless Solutions Software Compatibility Matrix - Cisco
05-02-2021 09:31 PM
2600/3600 are not supported on 9800.
3504/5520/8540 are the "last" known WLC to support the 2600/3600.
05-03-2021 06:07 AM - edited 05-03-2021 06:19 AM
Thank you for reply.
How about ap3702? It also cannot join
05-03-2021 07:02 AM
Per the wlc matrix, it is supported.
Cisco Wireless Solutions Software Compatibility Matrix - Cisco
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide