04-13-2021 04:55 AM - edited 07-05-2021 01:08 PM
Hi, AP3602i cannot join WLC3504. Anyone can help to take a look at the below messages. Thank you
[*04/12/2021 15:46:59.6862] CAPWAP State: Discovery
[*04/12/2021 15:46:59.6885] Discovery Request sent to 10.10.10.3, discovery type STATIC_CONFIG(1)
[*04/12/2021 15:46:59.6906] Discovery Request sent to 10.10.10.3, discovery type STATIC_CONFIG(1)
[*04/12/2021 15:46:59.6933] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*04/12/2021 15:47:09.3790]
[*04/12/2021 15:47:09.3790] CAPWAP State: Discovery
[*04/12/2021 15:47:09.3810] Discovery Request sent to 10.10.10.3, discovery type STATIC_CONFIG(1)
[*04/12/2021 15:47:09.3857] Discovery Request sent to 10.10.10.3, discovery type STATIC_CONFIG(1)
[*04/12/2021 15:47:09.3871] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*04/12/2021 15:47:19.0718]
[*04/12/2021 15:47:19.0718] CAPWAP State: Discovery
[*04/12/2021 15:47:19.0739] Discovery Request sent to 10.10.10.3, discovery type STATIC_CONFIG(1)
[*04/12/2021 15:47:19.0755] Discovery Request sent to 10.10.10.3, discovery type STATIC_CONFIG(1)
[*04/12/2021 15:47:19.0768] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*04/12/2021 15:47:28.7647]
[*04/12/2021 15:47:28.7647] CAPWAP State: Discovery
[*04/12/2021 15:47:28.7668] Discovery Request sent to 10.10.10.3, discovery type STATIC_CONFIG(1)
[*04/12/2021 15:47:28.7683] Discovery Request sent to 10.10.10.3, discovery type STATIC_CONFIG(1)
[*04/12/2021 15:47:28.7698] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*04/12/2021 15:47:38.4577]
[
04-13-2021 05:08 AM
- Presumably the AP has been using another controller in the past , on the AP issue :
capwap ap erase all
then try again
M.
04-13-2021 06:03 AM
This is NOT a vWLC, right?
What is this? 3504/5520/8540? Have you enabled the AP RTU license?
04-13-2021 06:41 AM - edited 04-13-2021 05:36 PM
capwap ap erase all
not work
its wlc3504
04-13-2021 03:49 PM
In CLI of the WLC, post the complete output to the following command:
sh ap join detail <AP MAC ADDRESS>
04-13-2021 09:41 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide