09-15-2015 06:11 PM - edited 07-05-2021 03:57 AM
Hi All,
I am new to cisco wireless. at one of my client sites i am facing an issue with their WLC when apple(iphone) users try to connect to wireless network. They use 2 SSIDs .WiFi@PA and Guest@PA. The problem is is that iphones connecting fine to WiFi@PA SSID but not Guest@PA. i checked the settings on both SSID configs and looks to me the same. I have attached the config file of WLC. Your help is highly appreciated.
Thanks,
Regards,
Marlon.
09-16-2015 01:53 AM
We have same issue
Solution - disconnect from both networks (delete config) on Iphone, disable wireless module, wautt, enable wireless - connect to Guest network. Then you wish to switch network - repeat procedure.
09-21-2015 12:56 AM
Please check if "Fast SSID change" is set to "Enabled" on the WLC at "Controller - General" setup. If not, enable it and then disconnect and reconnect again.
Regards,
Chris
09-21-2015 03:04 AM
HI Marlon,
1. Try to enable FAST-SSID CHANGE on WLC.
2. Use either WPA2/AES or WPA/TkiP
More info:
https://rscciew.wordpress.com/2014/06/07/fast-ssid-change/
Regards
Don't forget to rate helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide